Home / Mechanics / P-V Diagram

P-V Diagram: Thermodynamic Processes

JEECBSE
W: 0 J ΔU: 0 J Q: 0 J T₁ → T₂: 0 → 0 K

The physics

The shaded area under a P-V curve is always the work done by the gas — its shape depends entirely on which quantity is held constant during the process.

Isothermal: PV = const  W = nRT ln(V₂/V₁)  ΔU = 0
Isobaric: P = const  W = P(V₂−V₁)  ΔU = nCᵥΔT
Isochoric: V = const  W = 0  ΔU = Q = nCᵥΔT
Adiabatic: PVᵞ = const  W = (P₁V₁−P₂V₂)/(γ−1)  Q = 0

All four curves shown here are computed exactly from the ideal gas law and the first law of thermodynamics for the P₁, V₁, and V₂ you set — the numbers in the readout bar aren't pre-scripted, they follow directly from the equations above.

Exam tip: a very common JEE/NEET trap is assuming ΔU = 0 for any process where "nothing seems to change" — it's actually zero only for isothermal processes, since ΔU depends solely on temperature change for an ideal gas.

Sample data: the same doubling of volume by three processes

1 mole of a monatomic ideal gas starts at 300 K and 10⁵ Pa (24.9 litres) and expands to double the volume. The first law is Q = ΔU + W.

ProcessWork done by gas WChange in internal energy ΔUHeat added Q
Isothermal1,729 J0 J1,729 J
Isobaric (constant P)2,494 J3,741 J6,236 J
Adiabatic1,384 J−1,384 J0 J

Conditions: n = 1 mol, C_v = 1.5R, γ = 5/3, R = 8.314 J/mol·K.

Notice: for the same expansion the isobaric process does the most work (2,494 J) and the adiabatic one the least (1,384 J). In the isothermal case the temperature does not change, so all the heat taken in is turned into work. In the adiabatic case no heat enters, so the work is paid for by the gas cooling from 300 K to 189 K.

Quick answers

What is the first law of thermodynamics?
Q = ΔU + W: heat added to a system equals the increase in internal energy plus the work done by the system. It is conservation of energy including heat.
What are the isothermal and adiabatic conditions?
Isothermal: T constant, PV = constant, ΔU = 0. Adiabatic: no heat exchange, PV^γ = constant, Q = 0.
What are the isobaric and isochoric conditions?
Isobaric: P constant, W = PΔV. Isochoric: V constant, W = 0, so all the heat goes into internal energy, Q = ΔU.
What does the area under a P-V curve mean?
The work done by the gas. A cycle encloses an area equal to the net work per cycle, which is how engines are analysed.

Read the full guide: Thermodynamic processes compared with one gas

🎯 Practice Zone

Puzzle 1. 📊 The AREA under a P-V curve represents work done by the gas — yet the SAME initial and final states (same starting and ending pressure/volume points) can be connected by different paths on the P-V diagram, each enclosing a different area. What does this tell you about work in thermodynamics, compared to a "state" quantity like temperature?

This demonstrates that work is a PATH-DEPENDENT quantity, not a state function — unlike temperature, pressure, or internal energy (which depend only on the system's current state, regardless of how it got there), the total work done during a process genuinely depends on the specific path taken between the initial and final states, not just the endpoints themselves. This is precisely why thermodynamics carefully distinguishes between state functions (U, T, P, V) and path-dependent quantities (Q and W) — a genuinely important conceptual distinction, not just a mathematical technicality, since it directly determines which quantities you can calculate just from knowing start/end points versus which require knowing the full process.

Puzzle 2. 🌡️ An isothermal curve and an adiabatic curve, both starting from the exact same point on a P-V diagram, always diverge — with the adiabatic curve consistently falling more steeply as volume increases. Why does this steepness difference exist, given both curves show pressure decreasing as volume increases?

In an isothermal expansion, temperature stays constant by definition, so pressure drops purely due to the volume increase itself (following PV=constant). In an adiabatic expansion, the gas does work using ONLY its own internal energy (since no heat can enter from outside) — this means the gas's temperature actually drops as it expands, ON TOP of the volume increase, and this additional temperature drop pushes pressure down even further at any given volume compared to the isothermal case. Both effects (volume increase AND temperature decrease) combine in the adiabatic case, which is exactly why its curve consistently falls more steeply than the isothermal curve from the same starting point.

Puzzle 3. 🔄 A gas undergoes a complete CYCLIC process on a P-V diagram — starting and ending at exactly the same point, tracing out a closed loop. What can you say about the total change in internal energy over this complete cycle, regardless of how complicated the specific loop's shape is?

The total change in internal energy over any complete cycle is always EXACTLY ZERO — since internal energy is a state function depending only on the gas's current state (primarily temperature for an ideal gas), and the cycle returns to its exact starting state, there's genuinely no net change possible, regardless of how many twists, turns, or individual processes the specific cyclic path involves. This directly means, via the first law (ΔQ=ΔU+ΔW), that net heat absorbed over a complete cycle exactly equals net work done by the gas over that same cycle — a foundational principle underlying how heat engines convert cyclic heat input into useful net work output.

Puzzle 4. 🎯 On a P-V diagram, a clockwise cyclic loop represents a heat engine (net positive work output), while a counter-clockwise loop of the exact same shape represents a refrigerator or heat pump (net work INPUT required). Why does simply reversing the direction of traversal completely flip this fundamental behavior?

The enclosed area's sign (representing net work) depends directly on which direction you traverse the loop — going clockwise, the expansion portions (contributing positive work) occur at higher pressure than the compression portions (contributing negative work), yielding a net positive area, meaning the gas does net positive work on its surroundings (an engine). Going counter-clockwise around the identical loop reverses this relationship — compression now happens at the higher-pressure stages, meaning the surroundings must do net positive work ON the gas instead, exactly the defining behavior of a refrigerator or heat pump, consuming external work to move heat from cold to hot.

Puzzle 5. ⚖️ An isochoric (constant volume) process appears as a perfectly VERTICAL line on a P-V diagram — pressure changing while volume stays exactly fixed. Since the area under this line (technically, a vertical line segment has essentially zero width) is zero, what does this tell you about work done during a purely isochoric process?

A purely isochoric process does exactly ZERO work — this isn't just a mathematical curiosity about the graph's area being zero; it's a direct, physically sensible consequence of the definition of work in this context (W=∫PdV), since volume genuinely never changes at all during this process, meaning dV=0 throughout, so the work integral evaluates to exactly zero regardless of how dramatically pressure itself changes. This directly simplifies the first law for this specific case to ΔQ=ΔU exactly — any heat added during a purely isochoric process goes entirely into increasing internal energy, with none diverted into doing expansion work, since there's no volume change for the gas to push against.

Problem 1 (NEET level). 📘 One mole of ideal gas expands isothermally at 300K from volume 1L to 3L. Find the work done by the gas (W=nRT ln(V₂/V₁), R=8.314 J/mol·K).

W = nRT ln(V₂/V₁) = (1)(8.314)(300) ln(3)
W = 2494.2 × 1.0986 ≈ 2740 J

Problem 2 (JEE Main level). 📗 For the same isothermal process, find ΔU and ΔQ using the first law.

Isothermal: ΔU = 0 (temperature unchanged, and for an ideal gas, U depends only on T)
ΔQ = ΔU + ΔW = 0 + 2740 = 2740 J — all absorbed heat converts directly into work

Problem 3 (WBJEE level). 📙 A gas at 100,000 Pa and volume 1L undergoes adiabatic expansion to volume 2L (γ=1.4 for a diatomic gas). Find the final pressure using P₁V₁^γ = P₂V₂^γ.

P₂ = P₁(V₁/V₂)^γ = 100,000 × (1/2)^1.4
P₂ = 100,000 × 0.3789 ≈ 37,893 Pa

Problem 4 (CBSE Class 11 level). 📕 For the isochoric (constant volume) heating of a gas from 300K to 400K, with n=1 mole and Cv=20.8 J/mol·K, find ΔU and ΔQ.

ΔU = nCvΔT = (1)(20.8)(400−300) = 2080 J
Since isochoric means W=0: ΔQ = ΔU + 0 = 2080 J — all added heat becomes internal energy, exactly as explained in Puzzle 5

Problem 5 (JEE Advanced style). 📓 A gas undergoes a complete cycle: isothermal expansion (absorbing 2740J heat, doing 2740J work), then isochoric cooling back to original pressure (releasing 2080J heat, zero work), then isobaric compression back to start. If the isobaric step does −660J work on the gas, find the net work done by the gas over the entire cycle.

Net work = W₁ + W₂ + W₃ = 2740 + 0 + (−660)
Net work = 2080 J (net positive — the gas does net work on its surroundings over the complete cycle, confirming this represents a heat engine, consistent with Puzzle 4's clockwise-loop description)
🔧
1834

Émile Clapeyron introduced the P-V diagram as a graphical tool for analyzing Sadi Carnot's earlier theoretical work on heat engines, providing a visual method to represent and analyze thermodynamic cycles that remains standard today.

📐
1850

Rudolf Clausius formalized the first law of thermodynamics mathematically, providing the essential ΔQ=ΔU+ΔW relationship that underlies every process traced on a P-V diagram — connecting the graphical representation to rigorous energy accounting.

⚙️
Late 1800s

Steam engine designers used P-V diagrams (often called "indicator diagrams," directly measured using a mechanical device attached to real engines) to analyze and optimize actual engine performance — a genuinely practical industrial application of this theoretical tool.

🚗
20th century

Modern internal combustion engine design continues to rely heavily on P-V diagram analysis of the Otto and Diesel cycles, directly using the same enclosed-area-equals-net-work principle explored in this simulation to calculate and optimize engine efficiency.

❄️
Present day

P-V diagrams remain essential for analyzing refrigeration and air-conditioning cycles (counter-clockwise loops, as explored in Puzzle 4), directly informing the engineering design of the cooling systems used in homes, vehicles, and industrial facilities worldwide.