Home / Optics & Waves / Mirror Ray Diagram

Spherical Mirror Ray Diagram & Sign Convention

NEETCBSE
u: 0 cm v: 0 cm m: 0 —

The physics

This diagram uses the Cartesian sign convention: all distances are measured from the pole, with the object always on the negative side. The three principal rays are drawn from their actual computed directions — not pre-set illustrations — so you can verify they truly meet at the calculated image point.

Mirror formula: 1/v + 1/u = 1/f  (u always negative for a real object)
Concave mirror: f negative   Convex mirror: f positive
Magnification: m = −v/u  (negative m → inverted, positive m → erect)

Solid ray segments show where light actually travels; dashed segments show backward extensions used to locate a virtual image behind the mirror, where no real light actually goes.

Exam tip: the sign convention is the single most error-prone part of ray optics numericals. Memorize just one rule: object distance u is always negative, and everything else (image real/virtual, mirror type) follows automatically from the formula's own sign — you never need to "guess" a sign separately.

Sample data: images in a concave and a convex mirror of focal length 15 cm

The mirror formula 1/v + 1/u = 1/f and m = −v/u, using the sign convention of this simulation (concave f negative, convex f positive, real object u negative).

MirrorfObject distance uImage distance vMagnification mImage
Concave−15 cm−45 cm−22.5 cm−0.50real, inverted, diminished
Concave−15 cm−30 cm−30.0 cm−1.00real, inverted, same size
Concave−15 cm−20 cm−60.0 cm−3.00real, inverted, magnified
Concave−15 cm−10 cm+30.0 cm+3.00virtual, erect, magnified
Convex+15 cm−30 cm+10.0 cm+0.33virtual, erect, diminished

Conditions: spherical mirrors, small aperture (paraxial rays), sign convention of this page.

Notice: at u = −30 cm, the centre of curvature of the concave mirror, the image is real, inverted and the same size. Inside the focal length (u = −10 cm) the concave mirror gives a virtual, erect, enlarged image, which is how a shaving mirror works. A convex mirror always gives a smaller, erect, virtual image, as in the 0.33 shown.

Quick answers

What is the mirror formula?
1/v + 1/u = 1/f, where u is the object distance, v the image distance and f the focal length, all measured from the pole of the mirror. The magnification is m = −v/u.
How are focal length and radius of curvature related?
f = R/2. A mirror with a radius of curvature of 30 cm has a focal length of 15 cm.
What kind of image does a convex mirror form?
Always a virtual, erect and diminished image, wherever the object is placed in front of it. That is why a convex mirror is used as a vehicle's rear-view mirror.
When does a concave mirror form a virtual image?
When the object lies between the pole and the focus. The image is then behind the mirror, erect and magnified, as in a shaving mirror.

Read the full guide: Mirror formula and image formation: full guide with numericals

🎯 Practice Zone

Puzzle 1. 🚗 Passenger-side mirrors on cars are convex (curved outward) rather than flat, and often carry the printed warning "objects in mirror are closer than they appear." Why does a convex mirror specifically create this particular illusion?

A convex mirror always produces a virtual, upright, DIMINISHED (smaller) image, regardless of the object's actual distance — this is a genuinely universal property of convex mirrors, with no exceptions. Since your brain is accustomed to associating smaller apparent size with greater distance (a learned visual cue from ordinary flat-surface experience), a convex mirror's inherently size-reduced image tricks your brain into perceiving the reflected object as farther away than it genuinely is — precisely the illusion the printed warning is specifically correcting for.

Puzzle 2. 💇 A concave "makeup" or shaving mirror shows a magnified, upright image when your face is close to it — but flip the same mirror around to look at the back (now acting like a convex mirror), or step back far enough from the concave side, and the image behavior changes dramatically. What's actually controlling whether a concave mirror magnifies or not?

A concave mirror's image behavior depends entirely on exactly where the object sits relative to the mirror's focal point (F). When the object is CLOSER to the mirror than F (as with your face held close to a makeup mirror), you get a magnified, upright, virtual image — genuinely useful for close-up detail work. Once the object moves FARTHER than F, the image flips to become real, inverted, and its size depends further on exact distance (magnified between F and 2F, same-size at 2F, diminished beyond 2F) — a dramatically different behavior from the same physical mirror, purely because of this one distance threshold.

Puzzle 3. 🔦 A concave mirror is used behind a car's headlight bulb or a flashlight's bulb, rather than a flat or convex mirror. Why is concave specifically the right choice for creating a strong, directed beam of light?

When a light source is placed exactly AT a concave mirror's focal point, the reflected rays all emerge perfectly parallel to each other, rather than spreading out or converging — creating a strong, directed, non-spreading beam, precisely the useful behavior for headlights, flashlights, and search lights. A flat mirror would reflect light without this beam-collimating effect, and a convex mirror actively spreads reflected rays apart (diverging them), the exact opposite of what's needed for a focused beam — concave is specifically chosen because it's the only mirror shape geometrically capable of producing this parallel-ray collimation from a point source at its focus.

Puzzle 4. 🌌 Large astronomical telescopes almost universally use large concave (parabolic) mirrors, rather than large lenses, to gather and focus starlight. Why do astronomers generally prefer mirrors over lenses for very large telescopes specifically?

A large mirror can be supported entirely from behind across its whole surface, while a large lens can only be supported around its outer edge — under its own weight, a sufficiently large lens would sag and distort in the middle, degrading image quality, a genuine structural engineering problem that gets worse as size increases. Mirrors also completely avoid chromatic aberration (different colors focusing at slightly different points, an inherent limitation of refraction through any lens), since reflection off a mirror surface treats every color of light identically — this combination of structural and optical advantages is exactly why the largest modern telescopes use mirrors, not lenses, as their primary light-gathering element.

Puzzle 5. 🎯 In mirror ray-diagram problems, why does using ANY two of the standard "easy" rays (through the center of curvature, through the focal point, parallel to the axis) always locate the exact same image point, regardless of which two you happen to choose?

Every single ray leaving a specific point on the object, after reflecting off the mirror according to the actual law of reflection, converges to (or appears to diverge from) the exact same image point — this is a genuine, rigorous consequence of the mirror's precise geometric shape, not a coincidence specific to these particular "easy" rays. The two or three standard rays are chosen purely because their reflected paths are simple and predictable to draw accurately by hand — but mathematically, ANY two distinct rays from the same object point would locate the identical image point if traced correctly, since they're all just different rays obeying the same single law of reflection from the same curved surface.

Problem 1 (NEET level). 📘 An object is placed 30cm in front of a concave mirror with focal length 10cm. Find the image distance using the mirror formula.

1/v + 1/u = 1/f, with u=−30cm, f=−10cm (concave, negative by convention)
1/v = 1/f − 1/u = 1/(−10) − 1/(−30) = −3/30+1/30 = −2/30
v = −15cm (real image, since concave mirror with object beyond 2F gives a real image between F and 2F on the same side)

Problem 2 (JEE Main level). 📗 Using the same result, find the magnification and describe the image.

m = −v/u = −(−15)/(−30) = −0.5
Negative sign means inverted; magnitude 0.5 means diminished (half size) — a real, inverted, smaller image

Problem 3 (WBJEE level). 📙 An object is placed 5cm from the same concave mirror (f=10cm), closer than the focal point. Find the image distance and describe the image.

1/v = 1/(−10) − 1/(−5) = −1/10+2/10 = 1/10
v = +10cm (positive means virtual, behind the mirror)
m = −v/u = −10/(−5) = +2 — virtual, upright, magnified (double size) — the classic "shaving mirror" case

Problem 4 (CBSE Class 10 level). 📕 A convex mirror has focal length +15cm (positive, by convention). An object is placed 20cm in front of it. Find the image distance.

1/v = 1/f − 1/u = 1/15 − 1/(−20) = 1/15+1/20 = 7/60
v = 60/7 ≈ +8.57cm — positive (virtual, behind the mirror), confirming convex mirrors always give virtual images for real objects

Problem 5 (JEE Advanced style). 📓 An object is placed exactly at the center of curvature (u=2f) of a concave mirror. Show that the image forms at exactly the same distance, with magnification exactly −1.

Let f be the focal length, so u=−2f (center of curvature)
1/v = 1/(−f) − 1/(−2f) = −2/2f+1/2f = −1/2f
v = −2f — exactly the same distance as the object, confirming the image forms right back at 2F
m = −v/u = −(−2f)/(−2f) = −1 — same size, inverted, exactly matching the well-known "object at C gives image at C" result
📐
c. 300 BCE

Euclid documented the fundamental law of reflection in his work on optics — the single geometric rule from which every mirror ray-diagram construction in this simulation ultimately derives.

🔬
c. 1000 CE

Arab scholar Ibn al-Haytham (Alhazen) conducted rigorous experimental studies of concave and convex mirrors, correctly analyzing image formation and correcting several earlier Greek misconceptions about vision and reflection.

🔭
1668

Isaac Newton built the first practical reflecting telescope using a concave mirror rather than a lens, specifically to avoid the chromatic aberration (color distortion) that plagued the refracting telescopes of his era.

🚗
20th century

The widespread adoption of convex passenger-side mirrors on vehicles, precisely engineered for their wide field of view despite the "objects are closer than they appear" distance illusion, became a standardized road-safety feature.

🛰️
Present day

The largest optical telescopes on Earth (and space telescopes like Hubble and James Webb) all rely on large, precisely-shaped concave mirrors, directly building on the same reflection principles Newton first applied practically over 350 years ago.