Ask a class 10 student to draw the image formed by a concave mirror and you will see three pencils, a ruler and a lot of worry. Ask the same student for the position of the image using a formula, and the worry changes to sign errors. Both problems disappear once you know exactly what the mirror formula says and how to place the signs. So let us do it slowly.

Move the object in: the image changes from real to virtual as the object crosses F

The formula and the sign convention

1/v + 1/u = 1/f

Here u is the object distance, v is the image distance and f is the focal length, all measured from the pole of the mirror. For a spherical mirror, f = R/2, where R is the radius of curvature. The magnification is

m = h′/h = −v/u

The sign convention is the part that decides marks. Take the pole as the origin and the direction of the incident light as positive. Then every distance measured against the incoming light is negative. An object placed in front of the mirror has negative u. A concave mirror has negative f, a convex mirror has positive f. A real image forms in front of the mirror, so v is negative. A virtual image forms behind the mirror, so v is positive. Heights above the principal axis are positive, below it negative.

Quick memory trick: for a concave mirror, f is negative, and a real image always has negative v. If your answer for a real image comes out positive, you have made an arithmetic or sign slip somewhere. Check before you move on.

Concave mirror: the six cases you must know

Move an object from far away towards a concave mirror and the image changes in a fixed pattern. Keep this table in your notebook.

Object positionImage positionSizeNature
At infinityAt FPoint-sizedReal, inverted
Beyond CBetween F and CDiminishedReal, inverted
At CAt CSame sizeReal, inverted
Between C and FBeyond CMagnifiedReal, inverted
At FAt infinityHighly magnifiedReal, inverted
Between F and PBehind the mirrorMagnifiedVirtual, erect

The shift at F is the one students forget. Cross F, and the image jumps from real to virtual. A shaving mirror and a dentist's mirror work in this last region, which is why they show you a large, upright picture of your face or tooth.

Worked numericals with a concave mirror, f = 15 cm

Use the sign convention: f = −15 cm.

Object at 30 cm (u = −30): 1/v = 1/f − 1/u = −1/15 + 1/30 = −1/30, so v = −30 cm. The image forms at the same distance, in front of the mirror. m = −v/u = −(−30)/(−30) = −1. Real, inverted, same size. This is the case "object at C".
Object at 20 cm (u = −20): 1/v = −1/15 + 1/20 = −1/60, so v = −60 cm. m = −(−60)/(−20) = −3. The image is real, inverted and three times as large, sitting 60 cm in front of the mirror. This is why a projector-style setup works with an object between C and F.
Object at 10 cm (u = −10): 1/v = −1/15 + 1/10 = +1/30, so v = +30 cm. m = −30/(−10) = +3. Positive v means the image is behind the mirror, positive m means it is erect. Virtual, erect, magnified three times.

Convex mirror: only one kind of image

A convex mirror always gives a virtual, erect and diminished image, wherever the object is. Take f = +15 cm and u = −30 cm. Then 1/v = 1/f − 1/u = 1/15 + 1/30 = 1/10, so v = +10 cm, and m = −10/(−30) = +1/3. The image is one third of the object's size, upright and behind the mirror. Because it squeezes a wide view into a small image, a convex mirror is used as the rear-view mirror in vehicles and for security at road bends. Many cars print "objects in mirror are closer than they appear" for exactly this reason: the small image makes things look farther away than they are.

Plane mirror

A plane mirror is the limiting case with f → ∞, so 1/f = 0 and v = −u. The image is as far behind the mirror as the object is in front, the size is the same (m = +1), and the image is virtual and erect. It is laterally inverted, which is why the word AMBULANCE is written reversed on the front of the vehicle.

Where the formula goes wrong

Three habits cause almost every lost mark. First, writing f positive for a concave mirror. Second, using u without a sign: object distance is always negative in front of the mirror. Third, forgetting that the focal length is half the radius, so a mirror of radius 40 cm has f = 20 cm. Practise the formula alongside the ray diagram, because the diagram shows you what sign v should have before you calculate.

Try it yourself

Mirror Ray Diagram Reflection & Refraction Mirror Flip Puzzle