A sphere falling through a viscous fluid speeds up until the upward viscous drag (proportional to its speed) exactly balances gravity minus buoyancy — beyond that point, it falls at a constant terminal velocity.
This simulation integrates the actual equation of motion (net force = weight − buoyancy − drag, divided by mass) rather than jumping straight to the terminal velocity formula, so you can watch the approach to terminal speed happen gradually, exactly as it does in a real viscosity experiment.
v_t = 2r²(ρ_ball − ρ_fluid)g/(9η) for a steel ball of density 7800 kg/m³. The last column is the Reynolds number Re = ρvd/η, which should be below about 1 for Stokes' law to hold.
| Liquid | Viscosity η | Ball radius | Terminal velocity | Reynolds number |
|---|---|---|---|---|
| Glycerin | 1.49 Pa·s | 0.5 mm | 0.24 cm/s | 0.002 |
| Glycerin | 1.49 Pa·s | 1 mm | 0.96 cm/s | 0.016 |
| Glycerin | 1.49 Pa·s | 2 mm | 3.82 cm/s | 0.129 |
| Castor oil | 0.985 Pa·s | 1 mm | 1.51 cm/s | 0.029 |
| Engine oil | 0.29 Pa·s | 1 mm | 5.20 cm/s | 0.315 |
Conditions: viscosities at about 20 °C, steel ball in an unbounded liquid, g = 9.8 m/s².
Puzzle 1. ⚖️ A ball dropped into a viscous fluid eventually reaches a constant "terminal" velocity rather than continuing to accelerate forever under gravity. Why does it stop accelerating?
Puzzle 2. 📏 Terminal velocity scales with the SQUARE of the ball's radius (v∝r²), not simply proportional to radius. Why does doubling the radius quadruple the terminal velocity rather than just doubling it?
Puzzle 3. 🍯 Why does the same steel ball fall much slower (reach lower terminal velocity) in honey than in water, even though both are liquids and the ball's weight and buoyancy barely differ between them?
Puzzle 4. 🌡️ A liquid's viscosity typically decreases significantly as temperature increases (this is why honey pours much more easily when warmed). How would warming the fluid affect a falling ball's terminal velocity in this same experiment?
Puzzle 5. 🌧️ Raindrops falling from clouds reach a terminal velocity determined by air's viscosity and drag, rather than accelerating all the way to the ground at increasing speed. Why is this terminal-velocity effect fortunate for us, rather than dangerous?
Problem 1 (NEET level). 📘 Find the terminal velocity of a steel ball (ρ=7800 kg/m³, r=5mm) falling in glycerin (ρ=1260 kg/m³, η=1.5 Pa·s).
Problem 2 (JEE Main level). 📗 Verify that at this terminal velocity, drag force exactly equals the net downward force (weight minus buoyancy).
Problem 3 (WBJEE level). 📙 A second steel ball, with double the radius (r=10mm), falls in the same glycerin. Find its terminal velocity, and verify the r² scaling.
Problem 4 (CBSE Class 11 level). 📕 A steel ball (r=3mm) falls through an unknown oil (ρ=900 kg/m³) with measured terminal velocity 0.05 m/s. Find the oil's viscosity.
Problem 5 (JEE Advanced style). 📓 For Problem 1's scenario, estimate the Reynolds number (Re=ρ_fluid×v×d/η, where d is diameter) to check whether Stokes' law is actually valid (ideally Re≪1).
George Gabriel Stokes derives the exact drag force formula for a sphere moving slowly through a viscous fluid — a landmark result in fluid dynamics, obtained by directly solving the Navier-Stokes equations for this specific, highly symmetric case.
Robert Millikan famously applies Stokes' law in his oil-drop experiment, precisely measuring the terminal velocity of tiny charged oil droplets falling (and rising, under an applied electric field) to determine the fundamental charge of the electron — a direct, historically pivotal application of exactly this formula.
Millikan wins the Nobel Prize in Physics largely for this oil-drop work — Stokes' law, originally a pure fluid-dynamics result, turns out to be essential to one of the foundational measurements in atomic and particle physics.
Falling-ball viscometers based directly on Stokes' law become standard laboratory instruments for measuring fluid viscosity across chemistry, materials science, and industrial quality control, valued for their conceptual simplicity and direct connection to fundamental physics.
Stokes' law and its extensions remain essential in biomedical and environmental engineering — modeling the settling of blood cells in centrifuges, the fall of dust and pollutant particles through air, and the sedimentation of particles in water treatment processes.