Home / Mechanics / Spring-Mass System

Spring-Mass System (SHM)

NEETJEECBSE
x: 0 m v: 0 m/s F: 0 N Period T: 0 s

The physics

A mass on a spring obeys Hooke's law — the restoring force is directly proportional to displacement from equilibrium and always points back toward it. This makes it a perfect (not approximate, unlike the pendulum) simple harmonic oscillator at any amplitude.

F = −kx  (Hooke's law)
ω = √(k/m)   T = 2π √(m/k)
x(t) = A cos(ωt + φ)
Total energy E = ½kA² = KE + PE = constant (undamped)

Unlike the pendulum, this system is exactly simple harmonic at every amplitude — there's no small-angle approximation involved, which is why it's the standard textbook example for deriving SHM energy equations.

Exam tip: a frequent NEET/JEE question gives two different masses on the same spring (or vice versa) and asks for the ratio of periods — straight from T ∝ √(m/k), no calculation of A or x needed.

Sample data: oscillation of masses on a spring with k = 100 N/m

T = 2π√(m/k), ω = √(k/m), v_max = Aω and total energy E = ½kA², for an amplitude of 0.1 m.

Mass mPeriod TAngular frequency ωMaximum speedTotal energy
0.1 kg0.199 s31.6 rad/s3.16 m/s0.50 J
0.25 kg0.314 s20.0 rad/s2.00 m/s0.50 J
0.5 kg0.444 s14.1 rad/s1.41 m/s0.50 J
1 kg0.628 s10.0 rad/s1.00 m/s0.50 J
4 kg1.257 s5.0 rad/s0.50 m/s0.50 J

Conditions: k = 100 N/m, amplitude 0.1 m, no damping, massless spring.

Notice: making the mass 4 times larger doubles the period (0.314 s to 0.628 s for 0.25 kg to 1 kg), and the maximum speed is then halved. The total energy is 0.50 J in every row, as it depends only on k and the amplitude, not on the mass.

Quick answers

What is the time period of a spring-mass system?
T = 2π√(m/k). A stiffer spring (larger k) oscillates faster, a heavier mass oscillates slower, and the period does not depend on the amplitude.
What is Hooke's law?
The restoring force of a spring is proportional to its extension: F = −kx, where k is the spring constant in N/m.
How much energy does a spring store?
The potential energy is ½kx². In SHM the total energy is ½kA², where A is the amplitude, and it stays constant if there is no damping.
How do springs combine?
In parallel, k = k₁ + k₂ (stiffer). In series, 1/k = 1/k₁ + 1/k₂ (softer).

Read the full guide: Simple harmonic motion: the complete guide

🎯 Practice Zone

Puzzle 1. ⚖️ A spring-mass system's period depends on mass (T=2π√(m/k)), while a simple pendulum's period is completely independent of mass (T=2π√(L/g)) — two classic SHM systems, yet mass matters for one and not the other. Why does this fundamental difference exist?

In a spring-mass system, the restoring force (F=−kx) comes from the spring's elastic property alone and is completely independent of the object's mass — but that same force must accelerate whatever mass is attached, and a larger mass responds more sluggishly (smaller acceleration) to the identical force, directly slowing the oscillation and lengthening the period. In a pendulum, the restoring force is gravity acting on the bob — and gravity's force IS proportional to mass (F=mg sinθ for the tangential component), meaning a heavier bob experiences proportionally more restoring force, and this exactly cancels the heavier bob's greater sluggishness (more inertia), leaving the period completely unaffected by mass. This precise cancellation is the specific reason mass matters for one system but not the other.

Puzzle 2. 🚗 Car manufacturers deliberately choose specific suspension spring constants, and a car loaded with heavy cargo rides noticeably differently (usually "softer," with a longer bounce period) than the same empty car. How does this connect directly to the spring-mass period formula?

A car's suspension is fundamentally a spring-mass system, with the car's total mass (including any cargo) playing the role of "m" in T=2π√(m/k). Adding heavy cargo increases the effective mass being supported by the springs, and since period increases with the square root of mass, a heavily loaded car genuinely does bounce more slowly (longer period) than the same empty car — a real, physically measurable consequence of exactly the same formula tested in NEET/JEE numericals, showing up in an everyday, tangible way every time a car is heavily loaded.

Puzzle 3. 🔗 Two identical springs, each with spring constant k, can be combined either in series (end to end) or in parallel (side by side, both attached to the same mass). Which combination would you expect to produce a STIFFER effective spring — meaning a shorter oscillation period for the same attached mass?

Parallel springs combine their stiffness additively (k_effective = k₁+k₂ = 2k for identical springs), since both springs simultaneously resist the same displacement together — genuinely stiffer, giving a SHORTER period. Series springs combine like resistors in parallel instead (1/k_effective = 1/k₁+1/k₂, giving k_effective = k/2 for identical springs), since each spring in series stretches independently, adding up their individual stretches for the same force — genuinely less stiff overall, giving a LONGER period. This is a directly analogous pattern to how resistors combine in electrical circuits, just with the stiffness/compliance relationship flipped.

Puzzle 4. 🌌 The spring-mass SHM formula T=2π√(m/k) contains no reference to gravity (g) at all — unlike the pendulum formula. Would a spring-mass oscillator's period be any different if the whole experiment were performed on the Moon, where gravity is much weaker?

No — a horizontal spring-mass oscillator's period would be EXACTLY the same on the Moon as on Earth, since gravity doesn't appear anywhere in the governing formula at all; the restoring force comes entirely from the spring's own elastic property, completely independent of the local gravitational field strength. This is a genuinely useful contrast with the pendulum (whose period DOES depend on g, and would be noticeably longer on the Moon's weaker gravity) — a favorite conceptual question specifically testing whether students have memorized the formulas or actually understood where each one's dependencies come from physically.

Puzzle 5. 📏 Unlike a pendulum (which is only approximately SHM, valid for small angles), a spring-mass system is EXACTLY simple harmonic at any amplitude, as long as the spring stays within its elastic limit. Why does the spring-mass system avoid the small-angle approximation the pendulum needs?

A spring's restoring force follows Hooke's law, F=−kx, which is EXACTLY linear in displacement by definition — there's no approximation involved at all, as long as the spring isn't stretched or compressed beyond its elastic limit (where the material would permanently deform or the linear relationship would break down). A pendulum's restoring force, by contrast, is genuinely proportional to sinθ (not θ itself), and sinθ≈θ is only a good APPROXIMATION for small angles — at larger swing angles, this approximation increasingly breaks down, making large-angle pendulum motion only approximately, not exactly, simple harmonic. This exactness is precisely why the spring-mass system is the standard textbook example for rigorously deriving SHM's energy equations.

Problem 1 (NEET level). 📘 A spring with k=200 N/m has a 2kg mass attached. Find the period of oscillation.

T = 2π√(m/k) = 2π√(2/200) = 2π√0.01
T = 0.628 s

Problem 2 (JEE Main level). 📗 The same spring instead has an 8kg mass attached (four times the original mass). Find the new period, and verify the √m scaling.

T = 2π√(8/200) = 2π√0.04
T = 1.257 s — exactly double the original 0.628 s, confirming T∝√m (quadrupling mass doubles the period)

Problem 3 (WBJEE level). 📙 Two identical springs (k=200 N/m each) support the same 2kg mass, connected in parallel. Find the new effective spring constant and period.

k_eff = k₁+k₂ = 200+200 = 400 N/m
T = 2π√(2/400) = 0.444 s — shorter than the single-spring period (0.628s), confirming parallel springs are stiffer and oscillate faster

Problem 4 (CBSE Class 11 level). 📕 The same two identical springs (k=200 N/m each) are instead connected in series, supporting the same 2kg mass. Find the effective spring constant and period.

1/k_eff = 1/200 + 1/200 = 2/200, so k_eff = 100 N/m
T = 2π√(2/100) = 0.888 s — longer than the single-spring period, confirming series springs are less stiff and oscillate more slowly

Problem 5 (JEE Advanced style). 📓 A 2kg mass on a k=200 N/m spring is displaced 0.1m from equilibrium and released from rest. Find its maximum speed during the resulting oscillation.

Using energy conservation: ½kA² = ½mv_max²
v_max = A√(k/m) = 0.1×√(200/2) = 0.1×10
v_max = 1.0 m/s — occurring exactly at the equilibrium position (x=0), where all the system's energy is kinetic
🔬
1660

Robert Hooke discovers the linear relationship between a spring's force and its extension — published initially as a Latin anagram to secure priority while he continued investigating, later revealed as "ut tensio, sic vis" ("as the extension, so the force"), now simply known as Hooke's law.

📐
Early 1700s

Mathematicians including members of the Bernoulli family formally solved the differential equation governing spring-mass motion, establishing the mathematical foundation for simple harmonic motion that remains essentially unchanged in textbooks today.

⏱️
1800s

Precision spring-based mechanisms (rather than pendulums) became essential for portable timekeeping — pocket watches and marine chronometers relied on carefully engineered springs (balance springs) providing SHM-based timing that, unlike pendulum clocks, worked reliably even while in motion, such as aboard a moving ship.

🚗
20th century

Automotive engineers applied spring-mass SHM principles directly to vehicle suspension design, carefully choosing spring constants to balance ride comfort against handling — precisely the same T=2π√(m/k) relationship explored in this simulation, now optimized for a completely different, everyday practical purpose.

🔬
Present day

The same spring-mass SHM mathematics remains foundational far beyond literal springs — used to model molecular vibrations in chemistry, the behavior of atoms in a crystal lattice, and countless other systems where a restoring force happens to be proportional to displacement.