Home / Electricity & Magnetism / Simple Electric Circuit

Simple Electric Circuit

Class 6Class 7
Switch open — no current flows

The physics

Electric current needs a complete path (a closed loop) to flow — a battery pushes current through wires, and a switch simply makes or breaks that loop. A bulb glows because current flowing through its thin filament heats it up.

More cells (in series) → more push (voltage) → brighter bulb
Two bulbs in series → they share the same current → each glows dimmer
Two bulbs in parallel → each gets its own full path → each glows as bright as a single bulb alone

This is exactly why old-style decorative light strings (all bulbs in series) would go completely dark if even one bulb failed — the loop broke — while your home's wiring uses parallel connections, so one light going out doesn't switch off the rest of the house.

Class tip: remember the difference by the word itself — a "series" of bulbs are strung one after another, forming a single line for current to squeeze through; "parallel" bulbs each have their own separate lane.

Sample data: bulbs connected in different ways to a 3 V battery

Each bulb has a resistance of 3 Ω. The battery is ideal and gives 3 V. The brightness depends on the power P = V²/R in each bulb.

ArrangementCurrentVoltage across each bulbPower in each bulbBrightness relative to one bulb
One bulb1.00 A3 V3.00 W1.00 (reference)
Two bulbs in series0.50 A1.5 V0.75 W0.25
Two bulbs in parallel2.00 A from the battery3 V3.00 W each1.00

Conditions: ideal 3 V battery, bulb resistance treated as constant at 3 Ω (a real filament changes with temperature).

Notice: two bulbs in series share the voltage, so each gets 1.5 V and glows at only one quarter of the power, not one half. Two bulbs in parallel each get the full 3 V and glow as brightly as a single bulb, but the battery now has to supply 2 A, twice as much current, so it will run down twice as fast.

🔍 Explore More!

Think About It 1. 🔌 Why does a simple electric circuit need to form a complete, unbroken loop — why won't a bulb light up if there's even a tiny gap anywhere in the wire?

Electric current is really a continuous flow of tiny charged particles moving all the way around the circuit, from the battery, through the wire, through the bulb, and back to the battery again — just like water needs a complete, unbroken pipe to flow through. Any gap anywhere in this loop — even a tiny one — completely stops that flow, exactly the same way a single missing section of pipe would stop water from flowing at all, no matter how good the rest of the pipe is.

Think About It 2. 💡 Old-fashioned Christmas light strings, wired in series, would go completely dark if just ONE bulb burned out — but modern homes never lose all their lights just because one bulb burns out somewhere in the house. Why the big difference?

In a series circuit, every bulb shares the exact same single loop of wire, one after another — if any single bulb breaks, it creates a gap in that one shared loop, and the whole circuit stops working, turning ALL the bulbs off at once. Homes use parallel wiring instead, where each light and appliance has its own separate, independent branch connected to the main supply — if one light burns out, only that one branch is broken, while every other branch (and every other light) keeps working completely normally.

Think About It 3. 🔋 A single battery can light one bulb reasonably brightly. If you connect two batteries in a row (adding their voltages together), does the bulb glow brighter, dimmer, or stay exactly the same?

The bulb glows noticeably brighter! Connecting batteries end-to-end (in series) adds their voltages together, giving a bigger overall "push" driving the electric current — more push generally means more current flowing through the bulb, and more current through the bulb's filament makes it heat up more and glow more brightly. This is exactly why many battery-powered devices (like flashlights and remote controls) use two or more batteries stacked in a row rather than just one.

Think About It 4. 🔀 Two identical bulbs are connected in parallel to the same battery (each with its own separate wire loop back to the battery). Does each bulb glow just as brightly as if it were the only bulb connected, or does having two bulbs somehow dim each one?

In an ideal parallel setup, each bulb gets the FULL voltage from the battery independently, so each one glows at essentially the same brightness as if it were the only bulb connected — this is exactly why parallel wiring is used throughout your house, so that turning on one lamp doesn't dim all the other lights in other rooms. This is genuinely different from series wiring, where adding more bulbs to the same shared loop actually does dim each individual bulb, since they all have to share the same limited push from the battery.

Think About It 5. 🚨 Why do household electrical circuits always include a fuse or a circuit breaker, deliberately designed to "break" the circuit on purpose under certain conditions?

If something goes wrong in a circuit — like a fault causing way too much current to flow, which could dangerously overheat the wires and potentially start a fire — a fuse or circuit breaker is specifically designed to detect this and automatically break the circuit loop before any real damage or danger happens. It's essentially a deliberate, controlled "safety gap" that only appears exactly when needed, protecting your home's wiring and everyone in it from a genuinely dangerous electrical problem.

Try It 1 (Class 6-7 level). ✏️ A circuit has a 6V battery connected to a bulb with resistance 3 ohms. Find the current flowing through the bulb.

Current = Voltage ÷ Resistance = 6 ÷ 3
Current = 2 amperes (A)

Try It 2 (Class 7 level). ✏️ A bulb with resistance 5 ohms has a current of 2A flowing through it. Find the voltage across it.

Voltage = Current × Resistance = 2 × 5
Voltage = 10 volts (V)

Try It 3 (Class 8 level). ✏️ A circuit has a 12V battery and a current of 4A flows through it. Find the total resistance.

Resistance = Voltage ÷ Current = 12 ÷ 4
Resistance = 3 ohms (Ω)

Try It 4 (Class 6 level). ✏️ Three bulbs are wired in SERIES. If one bulb burns out, what happens to the other two?

The other two bulbs will also go dark — since all three bulbs share one single loop, breaking any one bulb breaks the whole circuit

Try It 5 (Class 6 level). ✏️ Three identical bulbs are instead wired in PARALLEL. If one bulb burns out, what happens to the other two?

The other two bulbs will keep glowing normally — since each bulb has its own separate, independent loop back to the battery, one bulb failing doesn't affect the others at all
🔋
1800

Italian scientist Alessandro Volta built the world's very first true battery, called the "Voltaic Pile" — a stack of alternating metal discs and salty-water-soaked cardboard. For the first time in human history, scientists had a steady, continuous, and reliable source of electric current to experiment with, rather than just brief, uncontrollable sparks.

📐
1827

German scientist Georg Ohm carefully discovered the precise, reliable mathematical relationship between voltage, current, and resistance in a circuit — a discovery now known as "Ohm's Law." Interestingly, his work was initially dismissed and ignored by other scientists, but it eventually became one of the single most important and widely-used formulas in all of electrical engineering.

💡
1879

Thomas Edison and his team perfected a genuinely practical, long-lasting electric light bulb — and crucially, Edison specifically championed parallel wiring for household use, recognizing that people needed to be able to turn individual lights on and off independently, without every single light in the house going dark together.

🏠
Today

Every single room in your house today relies on the exact circuit principles explored in this simulation — parallel wiring throughout your home (so one light or appliance doesn't affect the others), plus fuses and circuit breakers for safety, both direct results of over 200 years of careful electrical science.