Home / Electricity & Magnetism / Self & Mutual Inductance

Self & Mutual Inductance

JEEWBJEE
L₁: 0 mH L₂: 0 mH Mutual M: 0 mH Induced EMF: 0 V

The physics

A changing current in a coil induces an EMF in itself (self-inductance) by changing its own flux — and if a second coil sits nearby, some of that changing flux links it too, inducing an EMF there as well (mutual inductance).

Self-inductance (solenoid): L = μ₀N²A/l
Self-induced EMF: ε = −L(dI/dt)
Mutual inductance: M = k√(L₁L₂)  (k = coupling coefficient, 0 ≤ k ≤ 1)

This simulation computes L₁ and L₂ from actual solenoid geometry (turns, area, length), then derives M from them and your chosen coupling — so every number shown is traceable back to real coil parameters, not set independently.

Exam tip: a common JEE/WBJEE question gives L₁, L₂ and M and asks whether the coupling is "loose" or "tight" — compute k = M/√(L₁L₂) directly; k close to 1 means tight coupling, k close to 0 means the coils barely interact.

Sample data: inductance of a solenoid as turns are added

For a long air-core solenoid L = μ₀N²A/ℓ. The last column shows the back-EMF L·dI/dt when the current changes at 100 A/s.

Turns NSelf inductance LEMF at dI/dt = 100 A/s
2000.025 mH0.003 V
4000.101 mH0.010 V
8000.402 mH0.040 V
16001.608 mH0.161 V

Conditions: ℓ = 0.20 m, cross-section A = 1.0×10⁻⁴ m², air core, μ₀ = 4π×10⁻⁷ T m/A.

Notice: doubling the number of turns multiplies L by four, not two, because the turns both produce flux and link to it. Going from 200 to 1600 turns is an 8× increase in N and a 64× increase in L.

Quick answers

What is self-inductance?
The property of a coil by which it opposes a change of current through itself. The induced EMF is ε = −L dI/dt, and L = Φ/I. For a long solenoid, L = μ₀N²A/l.
What is the unit and dimensional formula of inductance?
The unit is the henry (H): 1 H = 1 V·s/A = 1 Wb/A. The dimensional formula is [ML²T⁻²A⁻²].
What is mutual inductance?
The ability of one coil to induce an EMF in a neighbouring coil: ε₂ = −M dI₁/dt. For two coaxial solenoids of the same length l, M = μ₀N₁N₂A/l.
How much energy is stored in an inductor?
U = ½LI². The energy is stored in the magnetic field, with energy density B²/2μ₀.

🎯 Practice Zone

Puzzle 1. 🔋 A coil "resists" any change in the current flowing through it, even though the coil is made of ordinary, non-magical wire. Where does this resistance-to-change actually come from, physically?

As current changes, the coil's own magnetic field changes too, and by Faraday's law, this changing self-generated flux induces a "back-EMF" in the very same coil, opposing the change that created it (Lenz's law). This isn't some special magical property — it's ordinary electromagnetic induction applied to a coil's own field acting back on itself, which is precisely the definition of self-inductance.

Puzzle 2. ⚡ When you switch off a large inductor (like an electromagnet) suddenly, you can sometimes see a visible spark jump across the switch contacts — even though the switch was just turned OFF. Why does breaking a circuit produce a spark, rather than simply stopping current flow instantly?

An inductor fiercely resists any sudden change in current (its defining property) — opening a switch tries to force current to drop to zero instantaneously, but the inductor's back-EMF (e=−Ldi/dt) becomes extremely large precisely because dt is trying to be extremely small. This sudden, very high voltage spike can be large enough to ionize the air gap at the switch contacts, creating a visible arc/spark — this is exactly why circuits with large inductors (motors, relays, electromagnets) often need special protective components ("flyback diodes" or snubber circuits) to safely absorb this energy instead.

Puzzle 3. 🔀 Two coils placed very far apart, with no shared magnetic field at all, have essentially zero mutual inductance between them. What does this tell us about mutual inductance as a physical quantity — is it a property of one coil alone, or something else?

Mutual inductance is fundamentally a property of the RELATIONSHIP (geometric arrangement) between two coils together, not a property belonging to either coil individually — unlike self-inductance, which depends only on one coil's own geometry. This is exactly why moving two coils farther apart, or reorienting one relative to the other, changes M even though neither coil's own self-inductance (L₁ or L₂) changes at all — M genuinely depends on how much of coil 1's flux actually reaches coil 2, a shared, relational quantity.

Puzzle 4. 📻 A wireless phone charger transfers electrical energy across an air gap with no direct wire connection at all, using two coils facing each other. What electromagnetic principle from this simulation makes this possible?

Wireless charging is a direct, practical application of mutual inductance — an AC current in the charging pad's coil creates a changing magnetic field, which induces a corresponding EMF (and current) in the phone's receiving coil nearby, purely through their mutual inductance M, with no direct electrical wire connection needed at all. Charging efficiency depends heavily on the coupling coefficient k between the two coils — which is exactly why you typically need to align the phone precisely on the charging pad, to maximize how well the two coils' magnetic fields overlap.

Puzzle 5. 🧲 Can the coupling coefficient k between two coils ever exceed 1 (i.e., can M ever be larger than √(L₁L₂))?

No — k=1 represents the theoretical maximum, "perfect coupling," where literally 100% of one coil's magnetic flux passes through the other coil (an idealized limit, closely approached in practice by tightly wound transformers sharing a common iron core). Since coil 2 can never capture MORE flux than coil 1 actually produces, k is mathematically bounded between 0 (no coupling at all) and 1 (perfect coupling) — never exceeding this upper limit, a direct consequence of basic flux conservation.

Problem 1 (NEET level). 📘 Find the self-inductance of a 500-turn solenoid with cross-sectional area 0.001 m² and length 0.2 m.

L = μ₀N²A/l = (4π×10⁻⁷)(500)²(0.001)/(0.2)
L = 1.571 mH

Problem 2 (JEE Main level). 📗 Find the energy stored in this inductor when carrying 2A.

U = ½LI² = ½(1.571×10⁻³)(2)²
U = 3.142 mJ

Problem 3 (WBJEE level). 📙 Two coils with L₁=10mH and L₂=20mH have coupling coefficient k=0.8. Find the mutual inductance M.

M = k√(L₁L₂) = 0.8√(10×20) = 0.8√200
M = 11.31 mH

Problem 4 (CBSE Class 12 level). 📕 If the current in coil 1 changes at 50 A/s, find the EMF induced in coil 2 (using M from Problem 3).

ε₂ = M(dI₁/dt) = (11.31×10⁻³)(50)
ε₂ = 565.7 mV

Problem 5 (JEE Advanced style). 📓 A separate coil with L=5mH carries a current changing at 100 A/s. Find its self-induced EMF, and compare the mechanism to Problem 4's mutual-inductance case.

ε_self = L(dI/dt) = (5×10⁻³)(100)
ε_self = 500 mV
Both Problem 4 and this result use the identical mathematical form (inductance × rate of current change) — the only distinction is WHICH coil's changing current is inducing the EMF: another coil's current (mutual inductance) versus the same coil's own current (self-inductance).
🇺🇸
1831

Joseph Henry, working independently and roughly simultaneously with Faraday, discovers self-inductance while experimenting with electromagnets — noticing the characteristic spark produced when breaking a circuit containing a coil, exactly the phenomenon discussed in Puzzle 2.

🇬🇧
1831

Michael Faraday discovers mutual induction — that a changing current in one coil induces an EMF in a nearby second coil — the direct physical foundation of the transformer, published just before Henry's related work became widely known.

📏
1893

The SI unit of inductance, the henry (H), is formally named in Joseph Henry's honor at the International Electrical Congress in Chicago — a lasting recognition of his foundational, largely simultaneous contributions alongside Faraday.

📻
Early 20th century

Mutual inductance principles become essential to early radio technology — transformer coupling between circuits, and the coupling coefficient concept, directly shape the design of radio transmitters, receivers, and transformers throughout the era.

📱
21st century

Mutual inductance finds a major modern consumer application in wireless charging technology (Qi standard and similar systems) for smartphones and electric vehicles — a direct, still-active descendant of Faraday's and Henry's 1831 discoveries.