A wire's resistance depends on four things: the material it's made of (resistivity), how long it is, how thick it is, and its temperature. Doubling the length doubles resistance; doubling the cross-sectional area halves it.
This is why thin wires get hotter than thick ones carrying the same current (higher resistance means more heat for the same current), and why extension cords for high-power appliances need to be thick — a long, thin cord adds dangerous extra resistance.
R = ρL/A. The first four rows compare materials for the same wire; the last two change only the size of a copper wire.
| Material | Resistivity ρ | Wire | Resistance R |
|---|---|---|---|
| Copper | 1.68×10⁻⁸ Ω·m | 1 m, 1 mm diameter | 0.0214 Ω |
| Aluminium | 2.82×10⁻⁸ Ω·m | 1 m, 1 mm diameter | 0.0359 Ω |
| Iron | 9.70×10⁻⁸ Ω·m | 1 m, 1 mm diameter | 0.1235 Ω |
| Nichrome | 1.10×10⁻⁶ Ω·m | 1 m, 1 mm diameter | 1.4006 Ω |
| Copper | 1.68×10⁻⁸ Ω·m | 1 m, 2 mm diameter | 0.0053 Ω |
| Copper | 1.68×10⁻⁸ Ω·m | 2 m, 1 mm diameter | 0.0428 Ω |
Conditions: resistivities at about 20 °C.
Read the full guide: Resistance formula, resistivity and temperature
Think About It 1. 🔌 A long extension cord specifically needs to be noticeably thicker than a short one, to safely carry the same electric current to a high-power appliance. Why does the extension cord's LENGTH affect how thick it needs to be?
Think About It 2. 🧵 Two wires are made from the exact same metal and have the exact same length, but one is noticeably thicker than the other. Which wire would you expect to have LOWER electrical resistance, and why?
Think About It 3. 🥄 Electrical wires are almost always made from copper, rather than, say, iron, even though iron is generally cheaper. Why does the specific choice of metal matter so much for making a good electrical wire?
Think About It 4. 🌡️ If you heat up an ordinary metal wire (like the tungsten filament inside an old-style light bulb), its electrical resistance actually increases noticeably as it gets hotter. How could simply changing an object's temperature affect its electrical resistance?
Think About It 5. ⚡ A heating element (like inside a toaster or electric kettle) is deliberately made from a special alloy called nichrome, rather than ordinary copper wire, even though copper conducts electricity so well. Why would a heater specifically want a material with HIGHER resistance, rather than lower?
Try It 1 (Class 9-10 level). ✏️ A copper wire (resistivity 1.7×10⁻⁸ Ω·m) is 2m long with cross-sectional area 1×10⁻⁶ m². Find its resistance.
Try It 2 (Class 10 level). ✏️ The same wire is made twice as long (4m), keeping the same area. Find the new resistance.
Try It 3 (Class 10 level). ✏️ Instead, the original 2m wire's area is doubled (to 2×10⁻⁶ m²), keeping the same length. Find the new resistance.
Try It 4 (Class 10 level). ✏️ Two copper wires have the same length, but wire A has twice the cross-sectional area of wire B. Find the ratio of their resistances (R_A : R_B).
Try It 5 (Class 10 level). ✏️ A wire's length is tripled AND its area is also tripled at the same time. What happens to its overall resistance?
German scientist Georg Ohm carefully studied how different wires (made from different materials, with different lengths and thicknesses) affected electric current, discovering the precise mathematical relationships between resistance, length, and cross-sectional area still used and taught today.
As the first transatlantic telegraph cables were being planned and laid across the ocean floor, engineers had to carefully calculate exactly how much resistance such enormously long wires would have — genuinely critical calculations, since excessive resistance over such vast distances could make reliable signal transmission across the ocean completely impossible.
Engineers developed nichrome and similar high-resistance alloys specifically for practical heating applications — deliberately exploiting high resistivity for controlled, efficient heat generation, directly leading to the toasters, electric heaters, and hair dryers that quickly became common household appliances.
Understanding resistivity and the factors affecting resistance remains absolutely essential in modern electrical engineering — from designing efficient power transmission lines carrying electricity across entire countries, to selecting exactly the right wire thickness for household circuits, to engineering the precise heating elements inside countless everyday appliances.