Home / Electricity & Magnetism / Parallel Plate Capacitor

Parallel Plate Capacitor

NEETJEE
C: 0 pF Q: 0 nC E field: 0 kV/m Energy U: 0 nJ

The physics

A parallel plate capacitor stores charge by keeping equal and opposite charges separated on two close plates, creating a uniform field between them. A dielectric slab reduces the effective field for the same charge, which is exactly why it increases capacitance.

C = Kε₀A / d  (K = dielectric constant, ε₀ = 8.854 × 10⁻¹² F/m)
Q = CV   E = V/d   U = ½CV² = ½QV = Q²/2C

This simulation switches its computation depending on your chosen mode — with the battery connected, V is held fixed and Q = CV is recalculated as C changes; with it disconnected, Q is held fixed and V = Q/C is recalculated instead. Both are genuinely different physical scenarios, not the same formula relabeled.

Exam tip: a very common JEE/NEET trap asks what happens to energy when a dielectric is inserted with the battery disconnected — energy actually decreases (U = Q²/2C, and C increases while Q is fixed), even though intuition might suggest otherwise.

Sample data: capacitance with different dielectrics

C = Kε₀A/d. The plates stay connected to a 100 V battery, so Q = CV and U = ½CV².

DielectricConstant KCapacitance CCharge QEnergy U
Air (vacuum)189 pF8.9 nC0.44 μJ
Teflon2.1186 pF18.6 nC0.93 μJ
Paper3.7328 pF32.8 nC1.64 μJ
Glass (typical)7620 pF62.0 nC3.10 μJ
Pure water807,083 pF708.3 nC35.42 μJ

Conditions: plate area 0.01 m² (10 cm × 10 cm), separation 1 mm, V = 100 V, typical K values.

Notice: inserting a dielectric multiplies the capacitance by K, and with the battery connected the stored charge and energy increase by the same factor. Water would give 80 times the capacitance of air, but it is a poor practical choice because it conducts. The electric field between the plates is V/d = 10⁵ V/m in every row.

Quick answers

What is the capacitance formula?
C = Q/V in general. For a parallel plate capacitor C = ε₀A/d in air, and C = Kε₀A/d with a dielectric of constant K between the plates.
What is the unit and dimensional formula of capacitance?
The unit is the farad (F), where 1 F = 1 C/V. The dimensional formula is [M⁻¹L⁻²T⁴A²]. In practice μF, nF and pF are used.
What is the energy stored in a capacitor?
U = ½CV² = Q²/2C = ½QV. The energy sits in the electric field between the plates, with energy density ½ε₀E².
How do capacitors combine?
In parallel the capacitances add: C = C₁ + C₂. In series the reciprocals add: 1/C = 1/C₁ + 1/C₂, so the total is smaller than the smallest capacitor.

Read the full guide: Capacitor numericals: series, parallel, energy and dielectrics solved

🎯 Practice Zone

Puzzle 1. 🔋 With a battery permanently connected, inserting a dielectric between the plates increases both capacitance AND stored energy. But with the battery disconnected first, inserting the same dielectric increases capacitance while DECREASING stored energy. Why do these two scenarios give opposite energy outcomes?

The key difference is what stays fixed. With the battery connected, voltage V is held fixed, and energy U=½CV² increases directly with C — plus the battery actively supplies additional charge (and does additional work) as C increases. With the battery disconnected, charge Q is fixed instead (nowhere for it to go), and energy U=Q²/2C actually DECREASES as C increases in the denominator — no external source is doing extra work in this case; the dielectric material itself is pulled in by the field and does positive work on the system, at the expense of the stored electrical energy.

Puzzle 2. 📏 Doubling the plate separation d, with charge Q held fixed, doubles the voltage V across the capacitor. But doesn't a larger separation mean the plates are "farther apart," which intuitively might suggest a WEAKER field, not more voltage?

The electric field E between the plates, for a fixed charge Q, actually stays exactly constant regardless of separation (E=σ/ε₀ depends only on charge density, not distance) — but voltage is the field multiplied by distance (V=Ed), so increasing d directly increases V, even with the field itself unchanged. Your intuition about "farther apart, weaker something" is correct for the field's fall-off around a POINT charge, but a parallel plate capacitor's idealized uniform field between infinite plates behaves completely differently — a subtle but important distinction.

Puzzle 3. ⚡ A dielectric material inserted between capacitor plates always increases capacitance, never decreases it. Physically, why does adding an insulating material between the plates help store MORE charge for the same voltage, rather than getting in the way?

A dielectric's molecules become polarized by the external field (their positive and negative charge centers shift slightly apart), creating an internal opposing field that partially cancels the original field between the plates. This weaker net field means, for the SAME charge on the plates, the voltage (which equals field times distance) is now smaller — and since C=Q/V, a smaller V for the same Q directly means a larger capacitance. The dielectric doesn't "get in the way"; it actively reduces the effective field, letting more charge be stored per volt of applied voltage.

Puzzle 4. 🔌 Capacitors in series always have a SMALLER combined capacitance than any individual capacitor in the chain, while capacitors in parallel always have a LARGER combined capacitance. Why does combining capacitors work oppositely to combining resistors (where series resistance increases, parallel decreases)?

This opposite behavior comes directly from how capacitance is defined (C=Q/V) versus resistance (R=V/I) — they're essentially inverse relationships to voltage. In series, the same charge Q must pass through each capacitor, but the total voltage adds up across all of them, making the combined C=Q/V_total smaller. In parallel, each capacitor sees the same voltage, but total stored charge adds up across all of them, making the combined C=Q_total/V larger. It's precisely because C and R relate to V in inverse ways that their series/parallel combination rules end up mirror images of each other.

Puzzle 5. 🌩️ Real capacitors have a maximum voltage rating, beyond which they can suffer permanent damage ("breakdown"). What physically happens inside a capacitor when this breakdown voltage is exceeded?

Every insulating (dielectric) material has a maximum electric field it can withstand before its electrons get forcibly ripped free from their atoms by the field's strength — once this "dielectric strength" limit is exceeded, the material briefly becomes a conductor, allowing a sudden, often destructive spark or current surge to flow directly between the plates. This is exactly the same physical mechanism behind lightning (air's dielectric strength being exceeded during a storm) and is why capacitor datasheets always specify a maximum safe operating voltage.

Problem 1 (NEET level). 📘 Find the capacitance of a parallel plate capacitor with plate area 0.01 m² and separation 1mm (air-filled).

C = ε₀A/d = (8.854×10⁻¹²)(0.01)/(0.001)
C = 88.54 pF

Problem 2 (JEE Main level). 📗 The same capacitor is charged to 100V. Find the energy stored.

U = ½CV² = ½(88.54×10⁻¹²)(100)²
U = 0.443 μJ

Problem 3 (WBJEE level). 📙 A dielectric with εᵣ=5 is inserted, completely filling the gap. Find the new capacitance.

C_new = εᵣε₀A/d = 5 × 88.54 pF
C_new = 442.7 pF (exactly 5× the original, matching the dielectric constant directly)

Problem 4 (CBSE Class 12 level). 📕 Two capacitors, 2μF and 3μF, are connected first in series and then in parallel. Find both combined capacitances.

Series: C = (C₁C₂)/(C₁+C₂) = (2×3)/(2+3) = 1.2 μF
Parallel: C = C₁+C₂ = 2+3 = 5 μF
(Notice: series result is smaller than either individual capacitor, parallel result is larger than either — exactly as Puzzle 4 explains)

Problem 5 (JEE Advanced style). 📓 A 2μF capacitor is charged to 12V then disconnected from the battery, and a dielectric (εᵣ=3) is inserted. Find the new voltage and the change in stored energy.

Charge (fixed, battery disconnected): Q = CV = 2×12 = 24 μC
New capacitance: C_new = 3×2 = 6 μF
New voltage: V_new = Q/C_new = 24/6 = 4V (voltage decreased)
U_initial = ½(2)(12)² = 144 μJ,  U_final = ½(6)(4)² = 48 μJ
Energy decreased by 96 μJ — confirming the exam tip: energy genuinely decreases when a dielectric is inserted with the battery disconnected
⚡
1745–1746

The Leyden jar — the first practical capacitor — is invented independently by Ewald Georg von Kleist and Pieter van Musschenbroek, allowing electric charge to be stored and later discharged, a genuinely novel capability at the time.

🔬
1780s

Alessandro Volta studies charge storage systematically, introducing the term "capacity" (capacitance) and establishing quantitative relationships between charge, voltage, and geometry for simple parallel-plate arrangements.

📐
1800s–1830s

Michael Faraday conducts extensive experiments on dielectric materials placed between capacitor plates, discovering that different insulating materials boost capacitance by different, material-specific factors — leading to the concept of dielectric constant, and the SI unit of capacitance (the farad) later being named in his honor.

📡
Late 1800s–1900s

Capacitors become essential components in the emerging fields of radio and telecommunications, used for tuning circuits and filtering signals — practical applications that drove significant refinement of capacitor manufacturing and materials.

💻
Present day

Modern capacitors, still governed by exactly these same 18th and 19th century principles, are indispensable in virtually every electronic device — from energy storage in power supplies to the memory cells (DRAM) that store data in every computer's RAM.