Home / Optics & Waves / Newton's Rings

Newton's Rings: Thin Film Interference

JEEWBJEE
Dark ring 1: 0 mm Dark ring 5: 0 mm Center: Dark

The physics

Newton's rings form when a plano-convex lens rests on a flat glass plate, trapping a thin, wedge-shaped air film between them — thickest at the edges, shrinking to exactly zero right at the center contact point. Light reflecting off the top and bottom of this air film interferes, and because the film thickness varies smoothly with radius, the interference pattern forms concentric circular fringes rather than straight lines.

Dark ring radius: r_n = \u221A(n\u03BBR)   n = 1, 2, 3, ...
Bright ring radius: r_n = \u221A((n\u2212\u00BD)\u03BBR)
Center (n=0, r=0): always DARK

The center being dark (not bright) surprises many students, since the air film thickness is exactly zero there — you'd expect the two reflected rays to be perfectly in phase with zero path difference. The resolution is a subtle but genuinely important detail: light reflecting off the LOWER surface of the air film (glass plate, a denser medium) undergoes an extra 180\u00B0 phase shift that reflection off the upper surface (glass-to-air, a rarer medium) doesn't experience — this single extra half-wavelength shift is exactly enough to turn what would otherwise be a bright center into a dark one.

Exam tip: a very common JEE question asks for the ring radius ratio r\u2099/r\u2081 — since r_n\u221A\u2009n, this ratio always simplifies to \u221An, regardless of the specific \u03BB or R values given, a genuinely useful shortcut that avoids recalculating both radii from scratch.

Sample data: radii of dark Newton's rings

Dark rings have radius r_n = √(nλR). The centre (n = 0) is dark.

Ring number nRadius r_nDiameter D_n
10.767 mm1.535 mm
21.085 mm2.171 mm
31.329 mm2.659 mm
51.716 mm3.432 mm
102.427 mm4.854 mm
203.432 mm6.864 mm

Conditions: sodium light λ = 589 nm, lens radius of curvature R = 1.00 m, viewed in reflection.

Notice: the rings crowd together as n increases: the gap between rings 1 and 2 is 0.318 mm but between rings 9 and 10 only 0.125 mm. The diameter of the 4th ring would be exactly twice that of the 1st, because D ∝ √n.

🎯 Practice Zone

Puzzle 1. ⚫ At the exact center of the Newton's rings pattern, the air film thickness is precisely zero — meaning the two interfering reflected rays have traveled an identical path length. Simple intuition suggests this should produce constructive interference (a bright spot) — yet the center is always observed to be DARK. What's missing from the simple "equal path length means bright" intuition?

The simple path-length argument misses an important extra detail: light reflecting off a boundary from a RARER medium into a DENSER medium (like the air-to-glass boundary at the bottom of the air film, hitting the flat glass plate) undergoes an additional 180\u00B0 phase shift that reflection off a denser-to-rarer boundary (glass-to-air, at the lens's curved bottom surface) does NOT experience. Even with zero physical path difference at the center, this asymmetric phase shift between the two reflections means the two waves arrive genuinely out of phase — precisely equivalent to an extra half-wavelength path difference, converting what naive intuition expects to be bright into a definite dark center instead.

Puzzle 2. 🎯 The rings in a Newton's rings pattern get visibly closer together as you move outward from the center — unlike Young's double slit experiment, where fringes stay evenly, uniformly spaced no matter how far from the center you look. Why do these two interference patterns behave so differently in terms of fringe spacing?

Newton's ring radius grows as the SQUARE ROOT of the ring number (r_n\u221A\u221An), a directly nonlinear relationship — moving from ring 1 to ring 4 only doubles the radius (\u221A4=2), while moving from ring 4 to ring 9 only increases radius by 50% (\u221A9/\u221A4=1.5), meaning the actual spacing between successive rings genuinely shrinks at larger radius. Young's double slit fringes, by contrast, are evenly spaced in position because that pattern's geometry produces a directly LINEAR relationship between fringe number and position, not a square-root one — a fundamentally different underlying geometry (spherical air-wedge symmetry versus the double-slit's simpler linear path-difference geometry) is precisely why these two classic interference patterns look so visibly different.

Puzzle 3. 🔬 Newton's rings are a classic, still-used practical technique for testing whether a lens's curved surface is genuinely, precisely spherical — optical workshops use this pattern to check lens quality before shipping. How does simply looking at the ring pattern's SHAPE reveal manufacturing defects in the lens surface?

A perfectly spherical lens surface produces perfectly circular, evenly-shaped rings, precisely following the r_n=\u221A(n\u03BBR) formula at every angle around the pattern. Any genuine imperfection in the lens's curvature (a slight flat spot, an uneven grinding defect) directly distorts the resulting air film's thickness pattern at that specific location, which shows up immediately as a visible distortion in the otherwise-circular fringes right at that spot \u2014 rings that are slightly elliptical, or locally bulge outward or pinch inward, immediately reveal exactly where and how badly the lens surface deviates from a true sphere, without needing any separate, more complex measurement technique.

Puzzle 4. 💡 Filling the air gap between the lens and flat plate with a liquid (like water or oil) instead of leaving it as air measurably shrinks the ring radii, without changing the lens or plate at all. Why does simply changing what fills the gap affect the ring pattern's size?

The ring radius formula r_n=\u221A(n\u03BBR) technically uses the wavelength of light INSIDE the film medium, not necessarily light's wavelength in vacuum or air \u2014 filling the gap with a liquid of refractive index \u03BC effectively reduces the light's wavelength inside that film by a factor of 1/\u03BC (since wavelength shrinks in a denser medium), directly shrinking every ring's radius by a factor of 1/\u221A\u03BC compared to the same setup with air filling the gap. This is precisely why Newton's rings experiments can also be used to accurately measure an unknown liquid's refractive index, simply by comparing ring radii with air in the gap versus the same setup filled with that liquid.

Puzzle 5. 🌈 Newton's rings observed under ordinary white light (rather than pure monochromatic light) show colored fringes rather than simple alternating dark and bright rings \u2014 and the very center still remains distinctly dark even under white light. Why does the center stay dark for every color simultaneously, while the outer rings separate into visible colors?

The center's darkness comes specifically from the 180\u00B0 phase-shift argument in Puzzle 1, which applies identically regardless of wavelength \u2014 every color experiences this same destructive interference at exactly zero film thickness, so the center stays dark for all colors simultaneously, appearing as a genuinely dark (not colored) spot. Moving outward, each color's specific dark and bright ring positions depend on that particular wavelength (via r_n=\u221A(n\u03BBR), different \u03BB gives different r_n), so different colors' bright rings fall at slightly different radii \u2014 this gradual separation is exactly why the outer rings show visible rainbow-like color fringing under white light, even though the very center remains a genuinely uncolored dark spot common to every wavelength.

Problem 1 (NEET level). 📘 Using \u03BB=589nm and R=1m, find the radius of the first dark ring (n=1).

r\u2081 = \u221A(n\u03BBR) = \u221A(1 \u00D7 589\u00D710\u207B\u2079 \u00D7 1)
r\u2081 = 0.767 mm

Problem 2 (JEE Main level). 📗 For the same setup, find the radius of the 4th dark ring, and verify the r\u2099\u221A\u221An shortcut.

r\u2084 = \u221A(4\u03BBR) = r\u2081\u00D7\u221A4 = 0.767\u00D72
r\u2084 = 1.535 mm \u2014 confirming r\u2084/r\u2081 = \u221A4 = 2 exactly

Problem 3 (WBJEE level). 📙 Find the radius of the first BRIGHT ring (n=1) for the same setup, using r_n=\u221A((n\u2212\u00BD)\u03BBR).

r\u2081(bright) = \u221A(0.5 \u00D7 589\u00D710\u207B\u2079 \u00D7 1)
r\u2081(bright) = 0.543 mm \u2014 smaller than the first dark ring's 0.767mm, since it corresponds to a smaller effective order (n\u2212\u00BD=0.5, not n=1)

Problem 4 (CBSE Class 12 level). 📕 If the air gap is filled with a liquid of refractive index \u03BC=1.33, find the new radius of the first dark ring (same \u03BB, R), using r_n scaling as 1/\u221A\u03BC.

r\u2081(liquid) = r\u2081(air)/\u221A\u03BC = 0.767/\u221A1.33
r\u2081(liquid) = 0.665 mm \u2014 smaller than the air-filled 0.767mm, exactly as Puzzle 4 explains

Problem 5 (JEE Advanced style). 📓 Two dark rings have radii r\u2098=2mm and r\u2099=3mm for unknown orders m and n, with the same \u03BB and R. If n=m+5, find m and n using r\u2099\u00B2/r\u2098\u00B2 = n/m.

r\u2099\u00B2/r\u2098\u00B2 = 9/4 = n/m, and n = m+5
9m = 4n = 4(m+5) = 4m+20 \u2192 5m = 20 \u2192 m = 4
n = m+5 = 9, so m=4 \u2014 verify: 9/4 = 2.25, and n/m = 9/4 = 2.25 \u2713
🔬
1666–1704

Isaac Newton extensively studied these interference rings, carefully documenting their pattern and measuring ring diameters with painstaking precision — though working within his corpuscular (particle) theory of light, he could not fully explain their origin, which awaited the wave theory of light developed later.

💡
1801–1803

Thomas Young develops the wave theory of light and the principle of interference, finally providing the correct physical explanation for Newton's rings, decades after Newton's own careful but theoretically incomplete observations.

🏭
20th century

Newton's rings become a standard, practical quality-control technique in precision optics manufacturing — used routinely to verify lens surfaces meet exact spherical curvature specifications before shipping, directly exploiting the ring pattern's extreme sensitivity to surface imperfections.

🔬
Present day

The same thin-film interference principle behind Newton's rings underlies modern anti-reflective lens coatings, soap-bubble color patterns, and precision optical flatness testing — a direct, still practically important legacy of Newton's careful 17th-century measurements.