Materials respond to an external magnetic field based on their microscopic magnetic dipoles (from electron spin and orbital motion). Diamagnetic materials weakly oppose the field, paramagnetic materials weakly align with it, and ferromagnetic materials align strongly and can retain magnetization even after the field is removed.
Try raising the field then lowering it back to zero for each material — paramagnetic domains snap back to random immediately, while ferromagnetic domains stay partly aligned (a simplified illustration of hysteresis, the basis of permanent magnets and magnetic memory).
The relative permeability is μ_r = 1 + χ, and the field inside a material in an applied field is μ_r times the field in vacuum.
| Material | Type | Susceptibility χ | Field inside ÷ field in vacuum (μ_r) |
|---|---|---|---|
| Bismuth | Diamagnetic | −1.7×10⁻⁴ | 0.999834 |
| Copper | Diamagnetic | −9.6×10⁻⁶ | 0.999990 |
| Aluminium | Paramagnetic | 2.2×10⁻⁵ | 1.000022 |
| Platinum | Paramagnetic | 2.6×10⁻⁴ | 1.000260 |
| Soft iron (approx.) | Ferromagnetic | 5,000 | ≈ 5000 |
Conditions: approximate room-temperature volume susceptibilities (SI); the value for iron varies widely with purity and treatment.
Puzzle 1. 🧲 Diamagnetic materials are actually WEAKLY REPELLED by magnetic fields — genuinely the opposite behavior from the far more commonly discussed paramagnetic and ferromagnetic attraction. What's the underlying physical mechanism that causes this unusual repulsive response?
Puzzle 2. 🌡️ A ferromagnetic material (like iron) loses its strong magnetic properties abruptly above a specific temperature (the Curie temperature), behaving instead like an ordinary paramagnetic material. Why does this transition happen so suddenly at one specific temperature, rather than gradually weakening across a wide temperature range?
Puzzle 3. 🔁 A ferromagnetic material retains SOME magnetization even after an external magnetic field is completely removed (this is exactly what makes permanent magnets possible) — yet a paramagnetic material's alignment vanishes essentially instantly when the field is removed. Why does ferromagnetic ordering specifically persist without any continuing external field?
Puzzle 4. 🩺 MRI machines specifically avoid using strongly ferromagnetic materials anywhere near the imaging area (a genuine, serious safety concern — ferromagnetic objects can become dangerous projectiles near an MRI's powerful magnet), while paramagnetic contrast agents are sometimes deliberately injected into patients for improved imaging. Why do these two magnetically-responsive material categories receive such different treatment in medical practice?
Puzzle 5. 📼 Old magnetic tape (audio cassettes, floppy disks) and modern hard drives both store information using ferromagnetic materials, exploiting the retained ("remanent") magnetization discussed in Puzzle 3. Why is retained magnetization — rather than the momentary alignment seen in paramagnetic materials — specifically essential for any practical magnetic data storage technology?
Problem 1 (NEET level). 📘 Find the magnetic moment of a 50-turn current loop of area 0.01m² carrying 2A.
Problem 2 (JEE Main level). 📗 Find the torque on this magnetic dipole when placed at 90° to a 0.5T field.
Problem 3 (WBJEE level). 📙 Find the relative permeability μᵣ for a paramagnetic material with susceptibility χ=0.001, and for a diamagnetic material with χ=−0.00001.
Problem 4 (CBSE Class 12 level). 📕 Find the potential energy of the magnetic dipole from Problem 1 when aligned with a 0.5T field (θ=0°), and when anti-aligned (θ=180°).
Problem 5 (JEE Advanced style). 📓 A typical ferromagnetic material (like iron) has μᵣ≈1000. Find its magnetic susceptibility χ, and compare its order of magnitude to the paramagnetic and diamagnetic values from Problem 3.
Naturally magnetic lodestone (magnetite ore) has been known and studied since antiquity across many civilizations — the earliest known encounter with ferromagnetic behavior, centuries before any scientific understanding of its cause.
Anton Brugmans discovers diamagnetism in bismuth (1778), and Michael Faraday systematically studies and names diamagnetism and paramagnetism as distinct categories (1845), establishing the basic classification framework for how different materials respond to magnetic fields.
Pierre Curie discovers and characterizes the temperature dependence of magnetic properties, including the sharp Curie-temperature transition in ferromagnetic materials that now bears his name.
The development of quantum mechanics finally provides a genuine theoretical explanation for these magnetic behaviors — Werner Heisenberg's exchange interaction theory explains the cooperative alignment underlying ferromagnetism, while quantum theory explains the atomic-scale origin of both paramagnetism and diamagnetism.
Understanding of ferromagnetic, paramagnetic, and diamagnetic materials remains essential to modern data storage technology, MRI medical imaging, and materials science research — with diamagnetic levitation even being explored for frictionless bearing and transportation applications.