Heating a substance doesn't always raise its temperature. Away from a phase change, added heat raises temperature according to specific heat capacity. During a phase change, all the added heat goes into breaking or forming molecular bonds — the latent heat — and temperature stays exactly constant until the change is complete.
Notice the melting plateau is much shorter (less heat needed) than the boiling plateau — L_vaporization is nearly 7 times larger than L_fusion, because turning liquid into gas means completely separating molecules, while melting only loosens their rigid arrangement.
Q = mcΔT in the sloping parts and Q = mL at the flat parts, using the values on this page.
| Stage | Heat needed | Share of total | Running total |
|---|---|---|---|
| Ice −10 °C → 0 °C | 2,100 J | 0.7 % | 2,100 J |
| Melting at 0 °C | 33,400 J | 10.9 % | 35,500 J |
| Water 0 °C → 100 °C | 41,860 J | 13.7 % | 77,360 J |
| Boiling at 100 °C | 226,000 J | 74.0 % | 303,360 J |
| Steam 100 °C → 110 °C | 2,000 J | 0.7 % | 305,360 J |
Conditions: c_ice = 2.1, c_water = 4.186, c_steam = 2.0 J/g·°C, L_f = 334 J/g, L_v = 2260 J/g, no heat loss.
Think About It 1. 🧊 If you keep heating a glass of ice water at a steady rate, the temperature stays stuck at exactly 0°C for a while (while the ice slowly melts), even though you're continuously adding heat energy the whole time. Where is all that added heat energy actually going, if not into raising the temperature?
Think About It 2. 🫖 Once water reaches its boiling point (100°C) and starts actively bubbling and boiling, continuing to heat it further doesn't make it any hotter than 100°C — the temperature stays fixed there until all the water has boiled away. Why can't boiling water get any hotter, no matter how much more heat you add?
Think About It 3. 🥵 A severe steam burn (from actual steam, not just hot water) is often considerably more dangerous and painful than a burn from boiling water at the exact same 100°C temperature. Why might steam cause worse burns than water at the identical temperature?
Think About It 4. ❄️ Melting a block of ice into water takes noticeably less total heat energy than boiling that same amount of water completely into steam — even though both processes are examples of the same basic "phase change" idea. Why might melting require considerably less energy than boiling?
Think About It 5. 🏔️ At the very top of a tall mountain, water boils at a noticeably lower temperature than the usual 100°C, sometimes even below 90°C. Given everything explored in this simulation about heating curves and boiling points, what practical challenge would this create for someone trying to cook food up there?
Try It 1 (Class 9-10 level). ✏️ Find the heat needed to raise 1kg of water's temperature by 10°C (specific heat of water = 4200 J/kg°C).
Try It 2 (Class 10 level). ✏️ Find the heat needed to melt 1kg of ice at 0°C into water at 0°C (latent heat of fusion of ice = 336,000 J/kg).
Try It 3 (Class 10 level). ✏️ Find the heat needed to boil 1kg of water at 100°C completely into steam at 100°C (latent heat of vaporization = 2,260,000 J/kg).
Try It 4 (Class 10 level). ✏️ Find the TOTAL heat needed to take 1kg of ice at 0°C all the way to boiling water at 100°C (not yet turning it into steam), using specific heat 4200 J/kg°C and latent heat of fusion 336,000 J/kg.
Try It 5 (Class 10 level). ✏️ Two identical pots of boiling water are heated with a low flame and a high flame respectively. Does the high-flame pot's water reach a higher temperature than the low-flame pot's water?
Scottish scientist Joseph Black made the surprising discovery that melting ice absorbs a specific, measurable amount of heat energy without any change in temperature at all — a genuinely puzzling observation at the time, since scientists had previously assumed heat and temperature were essentially the same simple thing.
Black coined the term "latent heat" (meaning "hidden heat") to describe this mysterious energy absorbed during melting and boiling that doesn't show up as any change in temperature — a genuinely important conceptual breakthrough that helped separate the previously-confused concepts of "heat" and "temperature" for the first time.
Black's careful measurements of latent heat directly assisted his friend and collaborator, engineer James Watt, in dramatically improving the design of steam engines — precisely understanding how much energy is needed to convert water into steam (and back again) was genuinely essential engineering knowledge for making steam engines significantly more efficient.
Understanding latent heat remains essential in countless modern applications — from designing refrigerators and air conditioners (which rely on substances repeatedly absorbing and releasing latent heat as they change phase), to food scientists studying exactly why ice cream melts the way it does, all building directly on Joseph Black's careful 18th-century laboratory observations.