Home / Mechanics / Bernoulli's Theorem

Bernoulli's Theorem: Venturi Tube

NEETJEE
v (wide): 0 m/s v (narrow): 0 m/s P (wide): 0 kPa P (narrow): 0 kPa

The physics

Mass can't pile up or vanish inside a pipe, so where the pipe narrows, fluid must speed up to keep the same volume flowing per second (continuity equation). Bernoulli's theorem then says that speeding up costs something — and for a horizontal pipe, that something is pressure.

Continuity: A₁v₁ = A₂v₂  (volume flow rate is conserved)
Bernoulli (horizontal pipe): P₁ + ½ρv₁² = P₂ + ½ρv₂²
Applications: Torricelli's law (efflux speed from a tank) and dynamic lift (aircraft wings) both follow from this same equation.

The pressure gauges here are computed from your actual chosen radii and speed via both equations together — narrow the throat and the speedup (from continuity) directly increases the pressure drop (from Bernoulli), not as two separate coincidences but as one connected calculation.

Exam tip: a frequent NEET/JEE mistake is applying Bernoulli's equation between two points not on the same streamline, or forgetting the ρgh term when the pipe isn't horizontal — always check both conditions before equating two points.

Sample data: pressure drop in a Venturi tube

Continuity gives v₂ = v₁(A₁/A₂), and Bernoulli gives P₁ − P₂ = ½ρ(v₂² − v₁²) in a horizontal pipe.

Area ratio A₁/A₂Speed in narrow partPressure drop P₁ − P₂As % of atmospheric pressure
2:12 m/s1,500 Pa1.5 %
4:14 m/s7,500 Pa7.4 %
10:110 m/s49,500 Pa48.9 %

Conditions: water (1000 kg/m³), speed in the wide section 1 m/s, ideal non-viscous flow.

Notice: a 4:1 narrowing makes the water four times faster, but the pressure drop is 5 times larger than for 2:1 (7,500 Pa against 1,500 Pa), because it depends on the square of the speed. At 10:1 the drop is nearly half an atmosphere.

Quick answers

What is Bernoulli's equation?
P + ½ρv² + ρgh = constant along a streamline. It is the conservation of energy per unit volume for a flowing fluid.
What is the equation of continuity?
A₁v₁ = A₂v₂. In a narrower section the fluid moves faster, and by Bernoulli's equation the pressure there is lower.
What are the applications of Bernoulli's principle?
The Venturi meter, a perfume atomiser, a paint spray gun, the lift on an aerofoil and the way a roof can lift off in a strong wind.
What does Bernoulli's theorem assume?
The fluid is incompressible and non-viscous, and the flow is steady and streamlined. Real fluids with viscosity or turbulence only approximately follow it.

Read the full guide: Bernoulli's principle explained

🎯 Practice Zone

Puzzle 1. 💨 Fast-moving fluid has LOWER pressure than slow-moving fluid, according to Bernoulli's principle — genuinely counter-intuitive at first, since faster usually seems like it should mean "more forceful," not less pressure. What's the actual physical reasoning behind this relationship?

This comes directly from energy conservation along a streamline — total mechanical energy (pressure energy + kinetic energy + gravitational potential energy, all per unit volume) stays constant. If fluid speeds up (gaining kinetic energy) while staying at the same height, that extra kinetic energy must come from somewhere — specifically, from a REDUCTION in pressure energy. It's not that fast fluid is somehow "weaker"; it's that speeding up fluid genuinely requires converting some of its pressure energy into kinetic energy, exactly as the conservation law demands.

Puzzle 2. ✈️ Bernoulli's principle is often cited as (part of) the explanation for how airplane wings generate lift — air moving faster over the curved top surface creates lower pressure there. Is this explanation the complete physical story, or is something more involved?

Bernoulli's principle correctly describes a genuine, real contributing factor — faster flow over the top does correspond to lower pressure there, contributing to lift. However, the popular "equal transit time" explanation for WHY air moves faster over the top (the claim that air splitting at the leading edge must "meet up" simultaneously at the trailing edge) is actually a well-known physics myth — the real cause of the speed difference involves the wing's shape and circulation effects, combined with Newton's third law (the wing deflecting air downward, causing an equal-and-opposite upward reaction force). Both Bernoulli's pressure-difference view and the downwash/Newton's-third-law view correctly describe the same real lift force from different, complementary angles.

Puzzle 3. 🏠 A strong wind blowing across a roof can sometimes cause the roof to lift off during a severe storm, even though the wind isn't blowing UP at all — it's blowing horizontally across the roof's surface. How does Bernoulli's principle explain this seemingly paradoxical lifting effect?

Fast horizontal wind flowing across the roof's outer surface creates a region of significantly reduced pressure just above the roof (exactly the same principle as airplane wing lift). Meanwhile, the relatively still air trapped INSIDE the house or attic remains at normal, higher atmospheric pressure. This pressure difference — higher pressure pushing up from inside, lower pressure outside — creates a genuine net upward force on the roof, which in extreme storm conditions can be strong enough to actually lift roofing material off the structure entirely.

Puzzle 4. 🚿 Why does water flowing from a wide pipe into a narrower section speed up automatically, without needing any additional pump or driving force specifically at the narrow section?

This is a direct consequence of the continuity equation (conservation of mass) — since the SAME volume of incompressible fluid must pass through every cross-section per unit time (mass can't accumulate or vanish partway through a pipe), a smaller cross-sectional area MUST be compensated by a proportionally higher flow speed (A₁v₁=A₂v₂) to keep the volume flow rate constant. No additional pump is needed; it's simply a geometric/mathematical necessity that follows from fluid continuity, entirely independent of Bernoulli's pressure-energy relationship (though the two principles work together, as noted in the exam tip).

Puzzle 5. 🏺 Torricelli's law (efflux speed from a hole in a container, v=√(2gh)) looks mathematically identical to the speed of an object that has simply fallen freely through the same height h. Is this an actual physical coincidence, or is there a deeper reason for this exact match?

This isn't a coincidence at all — it's a direct, exact consequence of applying Bernoulli's equation (itself fundamentally an energy conservation statement) between the fluid's top surface and the hole. At both the top surface and the exit hole, pressure equals atmospheric pressure (both open to air), so the pressure terms cancel completely in Bernoulli's equation, leaving only the kinetic and gravitational potential energy terms — mathematically reducing to exactly the same energy-conservation equation used for ordinary free fall. Torricelli's law is, quite literally, free-fall physics applied to a fluid parcel.

Problem 1 (NEET level). 📘 Water flows from a large tank through a hole 5m below the surface. Find the efflux speed (Torricelli's law).

v = √(2gh) = √(2×9.8×5)
v = 9.90 m/s

Problem 2 (JEE Main level). 📗 Water flows through a pipe of area 0.01 m² at 2 m/s, then enters a narrower section of area 0.005 m². Find the speed in the narrow section.

A₁v₁ = A₂v₂ (continuity equation)
v₂ = A₁v₁/A₂ = (0.01)(2)/(0.005)
v₂ = 4 m/s

Problem 3 (WBJEE level). 📙 Find the pressure difference between the wide and narrow sections in Problem 2 (venturi meter setup, same height, water ρ=1000 kg/m³).

ΔP = ½ρ(v₂²−v₁²) = ½(1000)(16−4)
ΔP = 6000 Pa (pressure is lower in the faster-flowing narrow section)

Problem 4 (CBSE Class 11 level). 📕 Water at rest at the top of a tank (P=101325 Pa, 5m above a hole) flows to the hole where it exits at 10 m/s. Find the pressure at the hole (assuming the hole is at the same height as the reference point, i.e. h₂=0).

Bernoulli: P₁ + ½ρv₁² + ρgh₁ = P₂ + ½ρv₂² + ρgh₂
101325 + 0 + (1000)(9.8)(5) = P₂ + ½(1000)(10²) + 0
P₂ = 101325 + 49000 − 50000 = 100325 Pa (very close to atmospheric, as expected for an open hole exiting to air)

Problem 5 (JEE Advanced style). 📓 A simplified airplane wing has an area of 16 m² and experiences a pressure difference of 500 Pa between its lower and upper surfaces. Find the lift force generated.

Lift = ΔP × Area = 500 × 16
Lift = 8000 N (equivalent to supporting roughly 816 kg of weight — a plausible order of magnitude for a small aircraft's wing contribution)
🌊
1643

Evangelista Torricelli discovers the law governing efflux speed from a hole in a container, establishing the precise mathematical connection between fluid flow speed and height — a foundational early result in fluid dynamics.

📖
1738

Daniel Bernoulli publishes Hydrodynamica, deriving the general energy-conservation relationship between fluid pressure, speed, and height that now bears his name — one of the earliest and most influential works on fluid mechanics.

👨‍👦
1738–1743

A notable priority dispute unfolds between Daniel Bernoulli and his own father, Johann Bernoulli, over the mathematical formulation — Johann publishes his own competing treatise on hydraulics shortly after, in what historians consider a case of genuine (if uncomfortable) family scientific rivalry.

📐
1750s

Leonhard Euler provides the more general and rigorous mathematical derivation of Bernoulli's equation from first principles (Newton's laws applied to fluid elements), placing the empirically-motivated relationship on solid theoretical footing.

✈️
19th–20th century

Bernoulli's principle becomes central to the emerging science of aerodynamics as heavier-than-air flight develops, and to countless engineering applications including venturi meters, carburetors, and atomizers — a direct, still highly active legacy of 18th-century fluid mechanics.