Home / Electricity & Magnetism / AC Generator & Transformer

AC Generator & Transformer

NEETCBSE
EMF (instant): 0 V Peak EMF: 0 V

The physics

An AC generator produces alternating EMF by rotating a coil in a magnetic field — the changing flux induces an EMF exactly as Faraday's law describes. A transformer uses the same principle in reverse: an alternating current in the primary coil creates a changing flux that induces an EMF in the secondary coil, scaled by the turns ratio.

Generator: ε = NBAω sin(ωt)  (peak EMF = NBAω, when the coil plane is along the field)
Transformer (ideal): V_s / V_p = N_s / N_p   I_s / I_p = N_p / N_s  (power conserved: V_pI_p = V_sI_s)

This simulation enforces power conservation exactly — the secondary current is computed from the primary power divided by the secondary voltage, not assumed independently, so you'll always find V_pI_p equals V_sI_s for any turns ratio you choose.

Exam tip: a common NEET/CBSE mix-up is assuming a step-up transformer (more secondary turns) also increases current — it's the opposite: stepping up voltage always steps down current proportionally, since real transformers can't create power out of nothing.

Sample data: an ideal transformer at different turns ratios

The primary is connected to 230 V and the secondary delivers 100 W to a load. V_s/V_p = N_s/N_p and V_pI_p = V_sI_s.

Turns ratio N_s/N_pSecondary voltageSecondary currentPrimary current
0.0511.5 V8.696 A0.435 A
0.123.0 V4.348 A0.435 A
0.5115.0 V0.870 A0.435 A
2460.0 V0.217 A0.435 A
102,300.0 V0.043 A0.435 A

Conditions: ideal transformer (no losses), 100 W resistive load, primary 230 V.

Notice: the primary current stays at 0.435 A for every turns ratio, because the same power is drawn. A step-down transformer (ratio 0.05) gives only 11.5 V but a much larger current, 8.7 A. For comparison, a generator that delivers 230 V rms has a peak EMF of 230√2 ≈ 325 V (ε = NBAω sin ωt).

🎯 Practice Zone

Puzzle 1. ⚡ A transformer can step voltage up or down dramatically, yet it never violates energy conservation. How does a step-up transformer manage to output a higher voltage without creating extra energy from nothing?

A transformer trades voltage for current, never creating net power — it conserves power (P=VI), not voltage or current individually. A step-up transformer that doubles voltage automatically halves current on the output side, keeping VpIp=VsIs exactly (for an ideal, lossless transformer). There's no free energy gain; you're simply repackaging the same total power at a different voltage/current combination, useful because high voltage (low current) minimizes resistive transmission losses over long power lines.

Puzzle 2. 🔌 Why does a transformer only work with alternating current (AC) and completely fail to function with steady direct current (DC)?

Transformers work entirely through electromagnetic induction — the secondary coil's EMF depends on the RATE OF CHANGE of magnetic flux from the primary coil (Faraday's law), not the flux itself. Steady DC current produces a constant, unchanging magnetic field, giving zero flux change and therefore zero induced EMF in the secondary coil at all — no matter how large the steady DC current is. Only AC's constantly changing current (and thus changing flux) can induce any voltage in the secondary at all.

Puzzle 3. 🌀 An AC generator's output voltage varies sinusoidally with time, reaching zero twice every cycle. Why doesn't a light bulb connected to household AC power visibly flicker on and off at these zero-crossing moments?

Household AC operates at 50 or 60 Hz, meaning voltage crosses zero 100-120 times per second — far faster than the human eye's flicker-fusion threshold (roughly 60 Hz, above which flickering becomes imperceptible as continuous). Additionally, an incandescent filament's thermal inertia (it doesn't cool down instantly) smooths out these brief zero-crossing moments even further, while LED bulbs sometimes DO show detectable flicker under certain conditions (e.g., in slow-motion video) specifically because they lack this thermal averaging effect.

Puzzle 4. 🔥 Real transformers do lose some energy as heat, even though the ideal formula assumes zero losses. What are the main physical sources of these real-world transformer losses?

Two dominant loss mechanisms exist: resistive ("copper") losses from the actual electrical resistance of the coil windings (I²R heating, worse at higher currents), and "iron losses" in the magnetic core from hysteresis (energy lost repeatedly magnetizing/demagnetizing the core material each cycle) and eddy currents (small induced current loops within the core material itself, wasting energy as heat) — this is precisely why transformer cores are built from thin, electrically insulated laminated sheets rather than solid iron, to suppress these wasteful eddy currents.

Puzzle 5. 🏭 Electric power is transmitted over long distances at extremely high voltages (hundreds of kilovolts) rather than at the ~230V used in homes. Why does high-voltage transmission reduce power losses, given that the total power delivered is the same either way?

Resistive power loss in transmission lines is I²R, depending on the SQUARE of current, not directly on power or voltage. Since P=VI, achieving the same delivered power P at a much higher voltage V requires proportionally much lower current I — and because losses scale as I² (quadratically), even a modest reduction in current produces a dramatic reduction in wasted heat along the transmission lines. This is precisely why power grids use transformers to step voltage up for long-distance transmission, then step it back down for safer household and industrial use.

Problem 1 (NEET level). 📘 A generator coil with 100 turns, area 0.02 m², rotates in a 0.5T field at 50Hz. Find the peak EMF.

ε₀ = NBAω = NBA(2πf) = (100)(0.5)(0.02)(2π×50)
ε₀ = 314.2 V

Problem 2 (JEE Main level). 📗 Find the rms EMF for the same generator.

ε_rms = ε₀/√2 = 314.2/1.414
ε_rms = 222.1 V (household outlets rated at 230V rms are computed exactly this way from a higher peak voltage)

Problem 3 (WBJEE level). 📙 A step-down transformer has Np=1000 turns and Ns=100 turns, with 220V input. Find the output voltage.

Vs = Vp × (Ns/Np) = 220 × (100/1000)
Vs = 22.0 V

Problem 4 (CBSE Class 12 level). 📕 For the same transformer, if the primary current is 0.5A, find the secondary current (assuming an ideal, lossless transformer).

Power conservation: VpIp = VsIs
Is = VpIp/Vs = (220×0.5)/22 = 5.0 A
(Notice: current increased 10× while voltage decreased 10× — exactly matching the inverse turns ratio, confirming Puzzle 1's principle)

Problem 5 (JEE Advanced style). 📓 A real (non-ideal) transformer has 2000W input power but only delivers 1800W output power, due to core and winding losses. Find its efficiency, and the power lost as heat.

Efficiency = Pout/Pin × 100% = 1800/2000 × 100%
Efficiency = 90%
Power lost = Pin − Pout = 2000 − 1800 = 200 W (dissipated as heat from resistive winding losses and core hysteresis/eddy current losses)
🔁
1831

Michael Faraday discovers electromagnetic induction and builds the first primitive electric generator (a copper disk rotating between magnet poles) — the fundamental physical principle behind every AC generator and transformer since.

🔌
1878–1885

Multiple inventors, including Lucien Gaulard, John Dixon Gibbs, and later refined by William Stanley Jr., develop practical transformer designs — enabling AC power to be efficiently transformed to different voltages for the first time.

⚔️
1880s–1890s

The famous "War of Currents" erupts between Thomas Edison (championing DC power) and George Westinghouse with Nikola Tesla (championing AC power) — AC's decisive advantage was precisely its ability to use transformers for efficient long-distance transmission, something DC systems of that era couldn't achieve.

🏆
1893

Westinghouse's AC system wins the contract to power the World's Columbian Exposition in Chicago, and shortly after, to harness Niagara Falls for large-scale power generation — a decisive practical and public demonstration that helped settle the War of Currents firmly in AC's favor.

🌍
Present day

Virtually the entire world's electrical grid runs on AC power specifically because of the transformer's ability to efficiently step voltage up for transmission and down for safe household use — a direct, still-unbroken legacy of Faraday's 1831 discovery and the 1880s-1890s AC/DC competition.