"Write the dimensional formula of..." is one of the easiest marks in physics and also one of the easiest to lose if you only memorise. A better way is to know how to derive any dimension in ten seconds, and to keep a table of the common ones for revision. This page gives you both.
The seven base quantities
Every other dimension is built from these. In dimensional formulas we write them in square brackets: mass [M], length [L], time [T], electric current [A], temperature [K], amount of substance [mol] and luminous intensity [cd]. Mechanics uses only M, L and T. Electricity adds A. Heat adds K.
How to derive a dimensional formula
Start from a definition or a formula you already know, and replace each quantity with its dimensions. Take pressure: pressure = force/area. Force = mass × acceleration = [M][LT⁻²] = [MLT⁻²]. Area = [L²]. So [P] = [MLT⁻²]/[L²] = [ML⁻¹T⁻²]. Take resistance: R = V/I, and V = energy/charge = [ML²T⁻²]/[AT] = [ML²T⁻³A⁻¹], so [R] = [ML²T⁻³A⁻¹]/[A] = [ML²T⁻³A⁻²]. The method never changes.
Mechanics
| Quantity | SI unit | Dimensional formula |
|---|---|---|
| Velocity, speed | m/s | [M⁰L¹T⁻¹] |
| Acceleration | m/s² | [M⁰L¹T⁻²] |
| Force, weight | newton (N) | [M¹L¹T⁻²] |
| Momentum, impulse | kg·m/s (N·s) | [M¹L¹T⁻¹] |
| Work, energy, heat | joule (J) | [M¹L²T⁻²] |
| Power | watt (W) | [M¹L²T⁻³] |
| Pressure, stress, Young's modulus | pascal (Pa) | [M¹L⁻¹T⁻²] |
| Density | kg/m³ | [M¹L⁻³] |
| Angular velocity, frequency | rad/s, hertz (Hz) | [T⁻¹] |
| Angular acceleration | rad/s² | [T⁻²] |
| Moment of inertia | kg·m² | [M¹L²] |
| Torque | N·m | [M¹L²T⁻²] |
| Angular momentum | kg·m²/s (J·s) | [M¹L²T⁻¹] |
| Surface tension | N/m | [M¹T⁻²] |
| Coefficient of viscosity | Pa·s | [M¹L⁻¹T⁻¹] |
| Gravitational constant G | N·m²/kg² | [M⁻¹L³T⁻²] |
| Planck's constant h | J·s | [M¹L²T⁻¹] |
Heat and thermodynamics
| Quantity | SI unit | Dimensional formula |
|---|---|---|
| Specific heat capacity | J/(kg·K) | [L²T⁻²K⁻¹] |
| Latent heat (per unit mass) | J/kg | [L²T⁻²] |
| Thermal conductivity | W/(m·K) | [M¹L¹T⁻³K⁻¹] |
| Boltzmann constant k | J/K | [M¹L²T⁻²K⁻¹] |
| Gas constant R | J/(mol·K) | [M¹L²T⁻²K⁻¹mol⁻¹] |
Electricity and magnetism
| Quantity | SI unit | Dimensional formula |
|---|---|---|
| Electric charge | coulomb (C) | [A¹T¹] |
| Potential difference, EMF | volt (V) | [M¹L²T⁻³A⁻¹] |
| Resistance | ohm (Ω) | [M¹L²T⁻³A⁻²] |
| Resistivity | Ω·m | [M¹L³T⁻³A⁻²] |
| Conductance | siemens (S) | [M⁻¹L⁻²T³A²] |
| Capacitance | farad (F) | [M⁻¹L⁻²T⁴A²] |
| Electric field | V/m, N/C | [M¹L¹T⁻³A⁻¹] |
| Electric flux | V·m | [M¹L³T⁻³A⁻¹] |
| Permittivity ε₀ | F/m | [M⁻¹L⁻³T⁴A²] |
| Magnetic field B | tesla (T) | [M¹T⁻²A⁻¹] |
| Magnetic flux | weber (Wb) | [M¹L²T⁻²A⁻¹] |
| Inductance | henry (H) | [M¹L²T⁻²A⁻²] |
| Permeability μ₀ | H/m, T·m/A | [M¹L¹T⁻²A⁻²] |
| Magnetic moment | A·m² | [L²A¹] |
Dimensionless quantities
Strain, refractive index, relative density, the coefficient of friction, angles (radian) and the Reynolds number have no dimensions. They have no unit either, or are written with a pseudo-unit such as radian. A frequent trap: angle and solid angle are dimensionless, but they still have units (radian and steradian).
What dimensions can and cannot do
They can check whether an equation is homogeneous (both sides need the same dimensions), convert units between systems, and suggest the form of a relation such as the period of a pendulum, T ∝ √(l/g). They cannot give the numerical constant (the 2π in T = 2π√(l/g)), cannot handle trigonometric or exponential functions of dimensional arguments, and cannot tell you whether a correct-looking formula is actually true. A formula can be dimensionally right and still wrong in physics.
